Olympus 2 Changing the USB Class USB Class, Choose Audio Class, See P.17 and 19 regarding the sub

Page 111

9Setting of the USB Class

Changing the USB Class (USB CLASS)

When using this recorder as a USB microphone or USB speaker in the voice recognition software or other applications, it is necessary to set the USB class of this recorder to “AUDIO CLASS”. By using the USB microphone function, it enables enroll (= voice learning) operations of the voice recognition software.

			Press the 3 or 2 button in the
			1 sub menu screen, and select the
			“USB CLASS”.
	2,4		See ☞ P.17 and 19 regarding the sub
	2,4	3	menu.
			menu.
	5		Press the MENU/SET button.
	5		2 The USB class setup process begins.
	1		Press the 3 or 2 button to
	1		3 choose “AUDIO CLASS”.

4 Press the MENU/SET button to complete the setup screen.

5 Press the STOP button to close the sub menu.

When this recorder is connected to the computer for the first time after being changed to “AUDIO CLASS”, the driver will be installed automatically to the computer. “USB SPEAKER or USB MICROPHONE REMOTE” will be displayed on this recorder display, while connecting to the computer in “AUDIO CLASS”.

Changing the

USB Class

(USB CLASS)

9

111

Image 111

Contents DS-2 Table of Contents Alarm Message List 113 Troubleshooting 115 Using DSS Player Software Operating EnvironmentUpgrade Function Using as External Memory Computer 112Safe and Proper Usage General PrecautionsBatteries Main Features Recording timeYou may assign your own names to folders. P.61 Recorder has a Noise Cancel Function.*2 P.47 Playback speed can be controlled as preferred. P.39Set interval. P.45 Main Features Identification of Parts Identification of Parts Display LCD PanelReplacing batteries Battery cover openInserting Batteries Lightly press down on the arrow and slideRelease the Hold switch of the recorder Power SupplyTurning Off the Power Turning On the PowerSetting the Hold switch to the Hold position Remember to reset the Hold switch when using the recorderHold Set the year Setting Time/Date TIME&DATESet the hour Set the minuteChanging the Time/Date 2Press the 3 or 2 button to move to the item to be set Menu Setting MethodMain Menu Setting 1Press and hold the MENU/SET button for 1 second or longerSub Menu Setting Menu List Main MenuPress and hold the MENU/SET button for 1secomd or longer Sub Menu Recording RecordingPress the Folder button to choose a folder Press the REC button to startRecording functions PauseResume Recording REC Mode will be displayed on the screen P.16,18 Recording Modes REC ModePress the 3or 2button to choose Using the Variable Control Voice Actuator VcvaAdjust the start/stop actuation level Using the Variable Control Voice Actuator VcvaPress the REC button to start recording Low-sensitivity mode suited for dictation Microphone Sensitivity MIC SenseMIC Sense Stereo microphone ME51S optional Recording from External Microphone or Other DevicesRecording with External Microphone Recording the sound of other devices with this recorderRecording from External Recording the sound of this recorder with other devices5Press the 3or 2button to choose on Timer Recording Timer RECSetting end time Start time settingTimer Recording Timer REC Press the Stop button to close the main menu Connect the earphone to the EAR jack on the recorder Listening While Audio is Recorded Recording MonitorPlaying Playing Save Function of the Playback End PositionOperation How to CancelPlaying Last File End Playback through earphone Changing during playback Changing from the menu Changing the Playback Speed Play SpeedChoose Play Speed Continuous Playback ALL Play 2 choose ALL PlayPress the 3 or 2 button to choose between on and OFF Repeat Playback Cancel the continuous playback function 5complete the setup screen Auto Backspace Review Back Space2Press the MENU/SET button Skip Interval Setting Skip Space 2 choose Skip SpacePress the 3 or 2 button to set the skip interval Skip Interval Setting Skip Space Level Noise Cancel FunctionDisplays currently set Noise Cancel While the file is playingChoose a folder Alarm Playback Function AlarmAlarm sounds Press the 3or 2button to choose AlarmPress the 3or 2button to set HourTo accept the hour To enable alarm sound only Alarm Playback Function AlarmPress the Erase button Cancel is flashingErasing Erasing One File at a TimeWhile Start flashing ErasingErase All Files from a Folder Press the Erase button forSeconds or longer Erasing will start Display changes to ALL EraseFile locking setup process begins Locking Files LockMain menu opens P.16,18 Clearing an Index Mark Setting an Index MarkIndex Marks Locating an Index MarkIndex Marks Press the 3 or 2 button to set the contrast level LCD Contrast Adjustment ContrastOFF Backlight BacklightBacklight Choose between onOn System sounds are enabled OFF System sounds are disabled System Sounds BeepBeep Press the 3 or 2 button to choose characters Folder NameButton Push Action Recorder buttons that are used to input charactersAssigning Folder Names Folder Name 6Use the two following methods to quickly find charactersType of Characters Action Available charactersInput the character Assigning File Comments CommentPress the 3 or 2 button CommentMOVE? appears on the display File is moved Transfer is complete when Move Done appearsMoving Files Across Folders Press the 3 or 2 button to choose a destination folderWhile in stop or playback mode LCD Display InformationPress the Display button Vcva recording level meter While in record modeWhile recording in Vcva mode Recording level meter6Press the 3 button to choose Start Formatting the Recorder Format2Press the 3 or 2 button to choose SUB Menu 4Press the 3or 2button to choose FormatPress the 3 button again to Choose StartAgain Precautions on using the recorder connected to a PC Using DSS Player SoftwareBasic Operating Environment of DSS Player Operating Environment1Insert DSS Player into the CD- ROM drive Installing SoftwareInstallation Language Selection dialog box opens Be sure to confirm the following before installationAuthorizing the start of file copying Installing DSS PlayerInstalling the Device Driver Select where to install DSS PlayerRegister user information Installing SoftwareCompleting setup 1Insert DSS Player into the CD-ROM driveUninstalling Software 4Delete the Help File Uninstalling Software1Exit DSS Player 2Delete the Preferences File 3Delete the Executable FileUsing Online Help Search by ContentsSearch by Key word Connecting to your PC using the USB cable Connecting to Your PCScreen. Click Safely Remove Hardware Disconnecting from Your PCClick On the task bar Lower-right cornerConnecting to Your PC Connecting to your PC using the cradle Place the recorder on the cradleConnect Mark of the USB Remove the recorder from the cradle Click the start button, select All Running DSS PlayerClick DSS Player Version Start WindowsRunning DSS Player Device Manager Window Window Names DSS PlayerPlay Control Bar Dictation Folder Window2Select the voice file Download Voice Files from the RecorderDownload Selected Files 1Select the folderDownload complete Play the voice file Play a Voice FileSelect the folder Select the voice fileSelect the voice file to upload from Voice File List Box Upload Voice Files to the RecorderSelect the folder to upload Upload the voice file5Upload complete Upload Voice Files to the RecorderClick Transfer Send Voice Files with E-mailChanging User ID Enter the user ID in the Transfer User ID WindowChanging a folder name in the Device window Changing a Folder NameEditing File Comments Changing a folder name in the Voice Folder windowEditing a Template Content Box To the recorder Editing a Template1From the Tools menu, select Change to audio device Audio set upUSB Microphone/USB Speaker Uses as a USB SpeakerUses as a USB microphone Windows 2000, MeWindows XP Plus Upgrade Function Purchase and Upgrade1Start the DSS Player Select Upgrade to DSS Player Plus from the Help menu Upgrade to DSS Player Plus dialog will be displayedUpgrading to DSS Player Plus Plus Using Voice Recognition Software Click the Next button Voice Recognition in ViaVoice Audio set upAudio Setup Wizard window appears Change the recorder to Audio Class7Select a sound card Using Voice Recognition SoftwareDescription of Wizard Voice Recognition in Dragon NaturallySpeaking TrainingStartup Dragon NaturallySpeaking Creating a User5Recording Training Text Executing Voice Recognition Start of voice recognitionClicking the arrow at the right side When Dragon NaturallySpeaking is Selected Noise Canceling FunctionRecognition software start icon becomes an invalid display 105 Plus Joining Files 2Select the voice files3Select Join from the Edit menu Or press the button Selected folder Set the order of filesSetting dialog of the file to be split will be displayed 3Select Split from the Edit menu or Press the buttonSelect one file to split from the Voice File List Box Set the split position Input File NamesPress the Split button 3Press the OK button Plus Menu Setting of this Recorder1Select Configure recorder menu from the Download menu 2Execute Menu SettingChanging the USB Class USB Class Choose Audio ClassSee P.17 and 19 regarding the sub 4Copy the data Using as External Memory of the Computer1Start Windows 2Connecting the recorder to your PC 3Open the Explorer or Finder windowMessage Meaning Explanation Alarm Message ListAlarm Message List Troubleshooting SymptomProbable cause Troubleshooting Accessories optional Specifications 119 Technical Assistance and SupportP2-BZ8069-01 AP0501 Canadian RFI