Olympus 2 manual Timer Recording Timer REC

Page 30

3

Timer Recording (TIMER REC)

Timer Recording (TIMER REC)

 

9

Recording mode setting.

 

1 Press the 3 button or 2 button to

 

set the recording mode.

 

 

2 Press the MENU/SET button to

11

10

accept the recording mode.

When accepting the recording mode,

 

 

if the remaining memory is insufficient

 

 

for the reserved time, “MEMORY

 

 

FULL, CONTINUE?” will be displayed.

 

 

Press the 3 or 2 button to choose

 

 

“YES” or “NO”.

 

 

YES: If the setting is continued, the

 

 

remaining memory will be used

 

 

up while recording in timer, then

 

 

the recording will end.

 

 

NO: Returns to Procedure 5 (“ON”

 

 

flashes on the display).

 

 

Press the 3 or 2 button to

 

10 choose between “ONE TIME”

 

 

and “EVERY DAY”.

 

 

ONE TIME:

 

 

Records only once at the

 

 

specified time.

 

 

EVERY DAY:

 

 

Records every day at the

 

11

specified time.

 

Press the MENU/SET button to

 

complete the setup screen.

 

The duration, setting time, and timer

display, will be displayed in ( ) for 5 seconds.

30

Image 30
Contents DS-2 Table of Contents Using as External Memory Computer 112 Using DSS Player Software Operating EnvironmentUpgrade Function Alarm Message List 113 Troubleshooting 115General Precautions Safe and Proper UsageBatteries Main Features Recording timeYou may assign your own names to folders. P.61 Recorder has a Noise Cancel Function.*2 P.47 Playback speed can be controlled as preferred. P.39Set interval. P.45 Main Features Identification of Parts Display LCD Panel Identification of PartsLightly press down on the arrow and slide Battery cover openInserting Batteries Replacing batteriesTurning On the Power Power SupplyTurning Off the Power Release the Hold switch of the recorderSetting the Hold switch to the Hold position Remember to reset the Hold switch when using the recorderHold Set the minute Setting Time/Date TIME&DATESet the hour Set the yearChanging the Time/Date 1Press and hold the MENU/SET button for 1 second or longer Menu Setting MethodMain Menu Setting 2Press the 3 or 2 button to move to the item to be setSub Menu Setting Menu List Main MenuPress and hold the MENU/SET button for 1secomd or longer Sub Menu Press the REC button to start RecordingPress the Folder button to choose a folder RecordingRecording functions PauseResume Recording Recording Modes REC Mode REC Mode will be displayed on the screen P.16,18Using the Variable Control Voice Actuator Vcva Press the 3or 2button to chooseAdjust the start/stop actuation level Using the Variable Control Voice Actuator VcvaPress the REC button to start recording Low-sensitivity mode suited for dictation Microphone Sensitivity MIC SenseMIC Sense Recording the sound of other devices with this recorder Recording from External Microphone or Other DevicesRecording with External Microphone Stereo microphone ME51S optionalRecording the sound of this recorder with other devices Recording from ExternalTimer Recording Timer REC 5Press the 3or 2button to choose onStart time setting Setting end timeTimer Recording Timer REC Press the Stop button to close the main menu Listening While Audio is Recorded Recording Monitor Connect the earphone to the EAR jack on the recorderPlaying Save Function of the Playback End Position PlayingHow to Cancel OperationPlaying Last File End Playback through earphone Changing during playback Changing from the menu Changing the Playback Speed Play SpeedChoose Play Speed Continuous Playback ALL Play 2 choose ALL PlayPress the 3 or 2 button to choose between on and OFF Repeat Playback Cancel the continuous playback function 5complete the setup screen Auto Backspace Review Back Space2Press the MENU/SET button Skip Interval Setting Skip Space 2 choose Skip SpacePress the 3 or 2 button to set the skip interval Skip Interval Setting Skip Space While the file is playing Noise Cancel FunctionDisplays currently set Noise Cancel LevelPress the 3or 2button to choose Alarm Alarm Playback Function AlarmAlarm sounds Choose a folderPress the 3or 2button to set HourTo accept the hour Alarm Playback Function Alarm To enable alarm sound onlyErasing One File at a Time Cancel is flashingErasing Press the Erase buttonErasing While Start flashingErase All Files from a Folder Press the Erase button forSeconds or longer Display changes to ALL Erase Erasing will startFile locking setup process begins Locking Files LockMain menu opens P.16,18 Locating an Index Mark Setting an Index MarkIndex Marks Clearing an Index MarkIndex Marks LCD Contrast Adjustment Contrast Press the 3 or 2 button to set the contrast levelChoose between on Backlight BacklightBacklight OFFOn System sounds are enabled OFF System sounds are disabled System Sounds BeepBeep Folder Name Press the 3 or 2 button to choose characters6Use the two following methods to quickly find characters Recorder buttons that are used to input charactersAssigning Folder Names Folder Name Button Push ActionAvailable characters Type of Characters ActionComment Assigning File Comments CommentPress the 3 or 2 button Input the characterPress the 3 or 2 button to choose a destination folder File is moved Transfer is complete when Move Done appearsMoving Files Across Folders MOVE? appears on the displayWhile in stop or playback mode LCD Display InformationPress the Display button Recording level meter While in record modeWhile recording in Vcva mode Vcva recording level meter4Press the 3or 2button to choose Format Formatting the Recorder Format2Press the 3 or 2 button to choose SUB Menu 6Press the 3 button to choose StartPress the 3 button again to Choose StartAgain Using DSS Player Software Precautions on using the recorder connected to a PCOperating Environment Basic Operating Environment of DSS PlayerBe sure to confirm the following before installation Installing SoftwareInstallation Language Selection dialog box opens 1Insert DSS Player into the CD- ROM driveSelect where to install DSS Player Installing DSS PlayerInstalling the Device Driver Authorizing the start of file copying1Insert DSS Player into the CD-ROM drive Installing SoftwareCompleting setup Register user informationUninstalling Software 3Delete the Executable File Uninstalling Software1Exit DSS Player 2Delete the Preferences File 4Delete the Help FileUsing Online Help Search by ContentsSearch by Key word Connecting to Your PC Connecting to your PC using the USB cableLower-right corner Disconnecting from Your PCClick On the task bar Screen. Click Safely Remove HardwareConnecting to Your PC Connecting to your PC using the cradle Place the recorder on the cradleConnect Mark of the USB Remove the recorder from the cradle Start Windows Running DSS PlayerClick DSS Player Version Click the start button, select AllRunning DSS Player Dictation Folder Window Window Names DSS PlayerPlay Control Bar Device Manager Window1Select the folder Download Voice Files from the RecorderDownload Selected Files 2Select the voice fileDownload complete Select the voice file Play a Voice FileSelect the folder Play the voice fileUpload the voice file Upload Voice Files to the RecorderSelect the folder to upload Select the voice file to upload from Voice File List BoxUpload Voice Files to the Recorder 5Upload completeEnter the user ID in the Transfer User ID Window Send Voice Files with E-mailChanging User ID Click TransferChanging a folder name in the Voice Folder window Changing a Folder NameEditing File Comments Changing a folder name in the Device windowContent Box To the recorder Editing a Template Editing a TemplateUses as a USB Speaker Audio set upUSB Microphone/USB Speaker 1From the Tools menu, select Change to audio deviceUses as a USB microphone Windows 2000, MeWindows XP Plus Upgrade Function Purchase and Upgrade1Start the DSS Player Select Upgrade to DSS Player Plus from the Help menu Upgrade to DSS Player Plus dialog will be displayedUpgrading to DSS Player Plus Plus Using Voice Recognition Software Change the recorder to Audio Class Voice Recognition in ViaVoice Audio set upAudio Setup Wizard window appears Click the Next buttonUsing Voice Recognition Software 7Select a sound cardCreating a User Voice Recognition in Dragon NaturallySpeaking TrainingStartup Dragon NaturallySpeaking Description of Wizard5Recording Training Text Executing Voice Recognition Start of voice recognitionClicking the arrow at the right side When Dragon NaturallySpeaking is Selected Noise Canceling FunctionRecognition software start icon becomes an invalid display 105 Plus Joining Files 2Select the voice files3Select Join from the Edit menu Or press the button Set the order of files Selected folderSetting dialog of the file to be split will be displayed 3Select Split from the Edit menu or Press the buttonSelect one file to split from the Voice File List Box Set the split position Input File NamesPress the Split button 2Execute Menu Setting Plus Menu Setting of this Recorder1Select Configure recorder menu from the Download menu 3Press the OK buttonChanging the USB Class USB Class Choose Audio ClassSee P.17 and 19 regarding the sub 3Open the Explorer or Finder window Using as External Memory of the Computer1Start Windows 2Connecting the recorder to your PC 4Copy the dataAlarm Message List Message Meaning ExplanationAlarm Message List Troubleshooting SymptomProbable cause Troubleshooting Accessories optional Specifications Technical Assistance and Support 119Canadian RFI P2-BZ8069-01 AP0501