Door Stations
The MC2000 system supports two door stations. Once the doorbells are installed, they will ring on all room stations. Whether the doorbells can be heard or monitored from an individual room station depends on how it’s been set up. To set up the door station functionality for a particular room station, follow the steps shown below.
Use the same method shown below to establish the defaults for each of the two door stations. To get to the Door Station Menu select Door Station on the Setup Menu shown in Figure 5.
| Setup for front door |
Door station name | Setup for back door |
|
Return to setup menu
Figure 10 – Door station Menu
1.Press the Setup button for the desired door (front door or back door) as shown on Figure 10. The Door Station Setup menu is shown in Figure 11.
Set door system volume
Give a room station a name
Return to door station setup menu
Figure 11 – Door Station Setup Menu
| 2861 Congressman Lane Dallas, Texas 75220 800.877.6631 www.mssystems.com |
| Page 14 |
|
|
|
| ||
|
|
|
|
|