After 30 seconds of inactivity, the room station returns to the Greeting Menu shown in Figure 19.
Monitor Menu
The Monitor function allows you to monitor a particular room on the MC2000 system. A room can only be monitored from one room station at a time. A room cannot be monitored if the monitor function is disabled or if it is in Privacy mode. To monitor a room follow the steps below:
Room or door location to select for monitoring
Access to additional rooms on the system
Return to main menu
Figure 30 - Monitor Menu
1.To get to the Monitor Menu, select Main Menu from the Greeting Menu shown in Figure 19.
2.Select Monitor from the Main Menu shown in Figure 20.
3.To monitor a room, select the room you wish to monitor. To select a room just press the button next to the room name on the screen. The screen will indicate if a connection is established.
4.If a room has monitor functionality disabled the screen will display an “unable to monitor room X” message.
5.The room station in the room being monitored will display “Being monitored by room X” on its screen.
6.To stop monitoring a room, press the End button.
After 30 seconds of inactivity, the room station returns to the Greeting Menu shown in Figure 19.
| 2861 Congressman Lane Dallas, Texas 75220 800.877.6631 www.mssystems.com |
| Page 33 |
|
|
|
| ||
|
|
|
|
|