Memorex Mi4014 manual To SET or Reset the Alarm Time, On the Next

TO SET OR RESET THE ALARM TIME

SNOOZE 1 2

With the power off, press and hold eithertheALARM 1 button (to set Alarm 1) or ALARM 2 button1 (to set Alarm 2); the Alarm time2will blink in the display.

3 SNOOZE 2 1

Within 15 seconds, press the MIN

(Minute) button to set the alarm minute and the HOUR1 button to set the alarm hour. Make sure to2set the correct AM/PM setting.

While the alarm time is blinking, repeatedly press the MODE button to select alarm on for radio (FM or AM),3 iPod or buzzer.

NOTE: Make sure the corresponding indicator (RADIO [FM or AM], iPod, BUZZ) appears in the display.

				4SNOOZE	1	2
1	SNOOZE2
If set to Radio (in Step 2), then
			Press the ALARM 1 button 1 or
while the frequency is blinking,			ALARM 2	button	2 again;	the
set the frequency using the			maximum	alarm	volume	level
Tune/Skip/Search		o 1 or n	will blink.
2 button.			Press the Volume Up 3 and/or
NOTE: When the alarm time is			Down 4 button to increase and/or
reached, the unit will turn on the			decrease	the maximum alarm
band (AM or FM) and the			volume level.
frequency that you selected.			Press the ALARM 1 button 1 or
			ALARM 2 button 2 yet again.

CONTINUED ON THE NEXT PAGE

15