OPERATION (CONTINUED)
REPEAT PLAYBACK
1 |
| |
3 | 4 | |
1 | ||
|
2 |
|
1 | 2 |
|
3 |
2 |
1 |
To repeat a single track, press the REPEAT button ❶ once; the REPEAT indicator will blink. Press the Skip/Search (
) ❷ or ( 
) button ❸ to select the specific track that you wish to repeat. When the desired track number appears in the display,
press the PLAY/PAUSE (❿ 
) button ❹ to begin playback. The
specific track you selected will be repeated continuously.
To repeat all of the tracks on a disc continuously, press the REPEAT button ❶ twice; the REPEAT indicator will light solid.
Press the Play/Pause (❿ 
) button ❷ to repeat all tracks.
To cancel Repeat Playback, press the REPEAT button ❶ until the REPEAT indicator goes out. You can also cancel Repeat Playback by pressing the Stop (■) button ❷.
PROGRAMMED PLAYBACK
The CD player in this unit has a 19 track programmable memory that allows you to program up to 19 tracks on any disc for playback in any desired order. You may program 19 different tracks or you may also program certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1 |
2 |
3 |
Slide the POWER switch to the ON position to turn the unit on; the POWER indicator will light.
Press the CD OPEN/ CLOSE area to open the CD compartment door. Place a CD on the center spindle, with the printed label side facing up. Close the CD compartment door.
Press the PROGRAM button; “0” will appear in the display and the PROGRAM indicator will blink.
PROGRAMMED PLAYBACK CONTINUED ON THE NEXT PAGE
11