Kenwood TS-2000X, TS-B2000 Connecting Peripheral Equipment, Computer, Compatible Transceiver, Pin

CONNECTING PERIPHERAL EQUIPMENT

COMPUTER

The COM connector allows you to directly connect a computer or dumb terminal by using an RS-232C cable terminated with a 9-pin female connector.

No external hardware interface is required between your computer and the transceiver. See “APPENDIX” for information related to this connector.

TS-2000(X)/ TS-B2000

RS-232C serial port

COM connector Personal computer/

dumb terminal

Straight cable

COMPATIBLE TRANSCEIVER

When transferring data to or from another TS-2000(X), TS-570, or TS-870S, directly connect the two transceivers using the COM connectors.

When transferring data to other KENWOOD transceivers, use the optional IF-232C interface unit. Connect the IF-232C to the ACC 1 connector located on the compatible transceiver. 6-pin DIN plugs (E07-0654-XX) are available as options. Contact your dealer or a KENWOOD Service Center.

Connector

TS-2000(X) TS-2000(X)/870S/570 cable

Cross-wired cable TS-450S/690S/850S/950SDX

TS-2000(X)

See IF-232C manual.

DIN(6P)

IF-232CDIN(6P) RS-232C(25P)

Cross-wired cable

Straight cable

	Pin	Pin Name
Rear panel view on	No.
	1	GND
TS-450S/690S/850S/
	2	TXD
950SDX
	3	RXD
	4	CTS
	5	RTS
	6	NC

93