Kenwood TS-2000X, TS-B2000 instruction manual 7DCS, @0AGC, @3FINE, @4A.NOTCH, #0SPLIT

4 GETTING ACQUAINTED

S

1

3

5

7

9

20

40

	18	20		22	24				30
17	19		21	23		26	25	27		28	29

60 dB

10

PWR

ALC

25 5 0

FILTER

100W%

31 33 34 32

!7DCS

Appears when the DCS (Digital Code Squelch) of the main transceiver is ON {page 36}.

!8[R]

“R” appears when the Reverse function of the main transceiver is ON. “[R]” appears when the ASC (Automatic Simplex Check) of the main transceiver is activated {page 34}.

!9C T

“T” appears when the Tone function of the main transceiver is ON {page 33}. “C T” appears when the Continuous Tone Coded Squelch System (CTCSS) of the main transceiver is ON {page 35}.

@0AGC

Appears when the AGC (Automatic Gain Control) of the main transceiver is ON {page 38}. Disappears when the AGC is OFF.

@1M.B.C.

“B.C.” appears when the automatic Beat Canceller is ON. “M.B.C.” appears when the single Beat Cancel frequency is manually controlled {page 56}.

@2NB

Appears when the Noise Blanker is ON {page 57}.

@3FINE

Appears when the Fine function for the main Tuning control is ON {page 38}.

@4A.NOTCH

Appears when the DSP Auto Notch function of the main transceiver is ON {page 56}.

@5

“ ” or “” appears, depending on whether DSP Noise Reduction 1 (Line Enhanced method) or Noise Reduction 2 (SPAC method) of the main transceiver is selected {page 56}.

@6

“” appears when the TX Equalizer function is ON.

“” appears when the RX Equalizer function of the main transceiver is ON {pages 41, 78}.

@7

Appears when the Quick Menu function of the transceiver is ON {page 21}. It also appears when the frequency point of Program Scan Partially Slowed is selected on the main-transceiver {page 67}.

@8

“” appears when the Trace function is ON while

in Satellite mode. “” appears when the Reverse Trace function is ON {page 53}.

@9P.C.T.

Appears when Packet Cluster Tune mode is ON {page 53}.

#0SPLIT

Appears when the transmit frequency differs from the receive frequency {page 31}.

#1tA s

“tA” or “As” appears while VFO A is selected {page 18}. “A” appears while Menu A is being accessed {page 21}.

#2tB s

“tB” or “Bs” appears while VFO B is selected {page 18}. “B” appears while Menu B is being accessed {page 21}.

#3tM s

“tM” or “Ms” appears while a simplex memory channel is selected {page 59}. “tMs” appears while a split frequency memory channel is selected {page 60}.

#4

“” appears when the Frequency Lock function is

ON. “” appears when the Lock All key function is ON {page 77}.

15