Kenwood TS-B2000 Slottime, Trace OFF ON/ OFF, Tries TRI, Txdelay, Unproto, Xflow ON/ OFF

21 APPENDIX

Command	Short	Default	Parameter	Description
Name
				Specifies the period of random number generation intervals
SLOTTIME	SL	3	0 ~ 250	for the PERSIST/SLOTTIME method. The unit of the
				parameter is 10 milliseconds.
TRACE	TRAC	OFF	ON/ OFF	When ON, causes the TNC to display all received packets
				in their entirety.
TRIES	TRI	0	0 ~ 15	Specifies the number of transmission retries programmed in
				the retry counter.
TXDELAY	TX	50	0 ~ 120	Specifies the time delay between PTT ON and the start of
				transmission. The unit of the parameter is 10 milliseconds.
			Call1 (VIA	Specifies call signs to send a packet in Unprotocol mode.
UNPROTO	U	CQ	call2, call3,	Call1 is the call sign of the destination. Call2 to call9 are
			... call9)	call signs of stations to be digipeated through.
XFLOW	X	ON	ON/ OFF	Causes the TNC to perform software flow control when ON,
				or hardware flow control when OFF.

Note:

If you are using a PC with a communication program to control this built-in TNC, prepare the RS-232C cable (straight) for connecting to the COM teminal on the transceiver. Then, set the same communication speed by accessing Menu No. 56. Select the same communication speed and the communications parameters. They must be set 8-bit, 1-stop bit, Non-parity, except for 4800 bps. The 4800 bps is also used for the Quick Data Transfer function {page 80} and the communication parameters are fixed as 8-bit, 2-stop bit, Non-parity format.

112