Kenwood TS-B2000, TS-2000X instruction manual $0ATT, $1TNC, $2XIT, $3PRE, $5RIT, $6DCS, $9PWR, 3PKT

4 GETTING ACQUAINTED

	1	3	5	7	9		20	40	60
S										dB
		10		25	5	0		10	0W%
R
PW
C
AL
					FILTER

37	36	39		41	44	47	50	52	54
35	38		40		43	46	51		53

57 55 42 45 49 48 58 56

#5

Appears while in Satellite mode {page 53}.

#6

Appears while Memory Recall or Memory Scroll is being used for the sub-receiver {page 59}.

#7

Shows the memory channel number for the sub- receiver. If you select a channel over 99, a leading digit (1 or 2) appears (the memory number ranges from 00 to 299).

#8

Appears when the sub-receiver is selected for the transmission band.

#9

Appears when the sub-receiver’s functions can be controlled using the front panel keys.

$0ATT

Appears when the sub-receiver’s receive attenuator (–12 dB) is ON {pages 57, 73}.

$1TNC

Appears when the internal TNC is assigned to the sub-receiver.

$2XIT

Appears when Transmit Incremental Tuning of the main transceiver is ON {page 40}.

$3PRE

Appears when the receiver pre-amplifier of the sub- receiver is ON {page 57}.

$4+ =

“+” or “–” appears, indicating which offset direction is selected for the sub-receiver. “=” appears when the –7.6 MHz (430MHz) or –6.0 MHz (1.2 GHz) offset is selected (all E-types only) {page 32}.

$5RIT

Appears when Receive Incremental Tuning of the main transceiver is ON {page 38}.

$6DCS

Appears when the DCS (Digital Code Squelch) of the sub-receiver is ON {page 36}.

$7[R]

“R” appears when the Reverse function of the sub- receiver is ON. “[R]” appears when the ASC (Automatic Simplex Check) of the sub-receiver is activated {page 34}.

$8S

Appears when the sub-receiver meter shows the signal strength level {page 46}.

$9PWR

Appears when the sub-receiver meter shows the output power level {page 20}.

%0

Serves as an S-meter to measure and display the received signal strength for the sub-receiver. It also displays the relative output power when the sub-band is selected for the transmission.

%1C T

“T” appears when the Tone function of the sub- receiver is ON {page 33}. “C T” appears when the Continuous Tone Coded Squelch System (CTCSS) of the sub-receiver is ON {page 35}.

%2

Appears when the DSP Noise Reduction 1 of the sub- receiver is activated {page 56}.

%3PKT

Appears when the internal TNC is operating in Packet mode {page 49}.

16