Kenwood TS-2000X Memory Features Memory Transfer, Press MsVFO/ MG.SEL, Channel \ Channel Transfer

13 MEMORY FEATURES

MEMORY TRANSFER				Channel 00 ~ 289	a	Channel 290 ~ 299
■ Memory \ VFO Transfer
				RX frequency	a	TX/ RX frequency
	After retrieving frequencies and associated data
				TX frequency	a	(simplex)
	from Memory Recall mode, you can copy the data
	to the VFO. This function is useful, for example,
				Mode for RX	a	Mode for TX/ RX
	when the frequency you want to monitor is near
				Mode for TX	a	(simplex)
	the frequency stored in a memory channel.
	1 Recall the desired memory channel.			Offset frequency	a	Offset frequency
	2 Press [MsVFO/ MG.SEL].			Shift direction	a	Shift direction
	• When a simplex channel is recalled, the
				Reverse ON/ OFF	a	Reverse ON/ OFF
	data is copied to VFO A or VFO B,
				RX frequency step	a	TX/ RX frequency
	depending on which VFO was used to recall
	the channel.			TX frequency step	a	step (simplex)
	• When a split channel is recalled, the RX
				Tone frequency	a	Tone frequency
	data is copied to VFO A and the TX data is
				CTCSS frequency	a	CTCSS frequency
	copied to VFO B.
	Note:			DCS code	a	DCS code
	◆ The Memory Channel Lockout status and the subtone
				Tone/ CTCSS/ DCS	a	Tone/ CTCSS/ DCS
	frequency are not copied.
	◆ Pressing [MsVFO/ MG.SEL] after temporarily changing the			ON/ OFF		ON/ OFF
	retrieved data copies the new data to the VFO.			Memory Name	a	Memory Name
■ Channel \ Channel Transfer				Memory Channel	a	Memory Channel
				Lockout ON/ OFF		Lockout OFF
	You can also copy channel information from one
	memory channel to another. This function is
	useful when storing frequencies and associated
				Channel 290 ~ 299	a	Channel 00 ~ 289
	data that you temporarily change in Memory
	Recall mode.
				TX/ RX frequency	a	RX frequency
	1 Recall the desired memory channel {page 59}.
					a	TX frequency
	2 Press [M.IN] to enter Memory Scroll mode.
					a	Mode for RX
	• To exit Memory Scroll mode, press [CLR].			Mode for TX/ RX
					a	Mode for TX
	3 Select the memory channel where you would
				Offset frequency	a	Offset frequency
	like the data copied, using the MULTI/ CH
	control.
				Shift direction	a	Shift direction
	4 Press [M.IN] again.
				Reverse ON/ OFF	a	Reverse ON/ OFF
					a	RX frequency step
	Channel 00 ~ 289	a	Channel 00 ~ 289	TX/ RX frequency
				step (simplex)	a	TX frequency step
	RX frequency	a	RX frequency
				Tone frequency	a	Tone frequency
	TX frequency	a	TX frequency
				CTCSS frequency	a	CTCSS frequency
	Mode for RX	a	Mode for RX
				DCS code	a	DCS code
	Mode for TX	a	Mode for TX
				Tone/ CTCSS/ DCS	a	Tone/ CTCSS/ DCS
	Offset frequency	a	Offset frequency
				ON/ OFF		ON/ OFF
	Shift direction	a	Shift direction
				Memory Name	a	Memory Name
	Reverse ON/ OFF	a	Reverse ON/ OFF
				Memory Channel	a	Memory Channel
				Lockout ON/ OFF		Lockout OFF
	RX frequency step	a	RX frequency step
				When copying a memory channel 290 ~ 299 a
	TX frequency step	a	TX frequency step
				channel 290 ~ 299, Memory Channel Lockout
	Tone frequency	a	Tone frequency
				status changes to OFF, regardless of the original
	CTCSS frequency	a	CTCSS frequency	channel settings.
				The tables above illustrate how data is transferred
	DCS code	a	DCS code
				between memory channels.
	Tone/ CTCSS/ DCS	a	Tone/ CTCSS/ DCS
	ON/ OFF		ON/ OFF
	Memory Name	a	Memory Name
	Memory Channel	a	Memory Channel
	Lockout ON/ OFF		Lockout OFF

61