Memorex MD6882 manual CD Operation

CD OPERATION (CONTINUED)

5

6

If the CD player is subject to vibration during playback, the bars will disappear one by one. During the vibration, the music should continue to play the signals stored in the memory until the CD player can read the music data properly from the disc. At this time, the indicator will probably show fewer bars indicating the music signals stored in memory are low.

If all the bars disappear and the CD player is subject to immediate vibration, the unit may skip.

7 8

If no more vibration occurs, the music signals are once again stored into the memory and the indicator returns to full. When the memory is full, the top bar will blink and the disc rotation speed will drop to save power consumption.

To turn the Anti-Shock System off, press the ESP/BAND button.

To turn the Anti-Shock System on, press the ESP/BAND button again.

NOTES:

•When the CD player is used in a stable location, turn the Anti-Shock System off by pressing the ESP/BAND button. When the Anti-Shock System is Off, battery consumption is less.

•The Anti-Shock System provides for continuous sound output when unit is subject to vibration, but it will not correct errors, such as a defective or dirty CD.

11