CD OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
1 |
| 2 |
|
1 | 2 | 1 | 2 |
3 |
|
| 3 |
With a CD inserted, press the |
|
|
|
| |
PLAY/PAUSE (®p)/POWER ON button |
| Select the first track to be played back |
1 to turn the unit on and press the |
| using the Skip/Search o 1 or n ❷ |
STOP (■)/POWER OFF button 2 to |
| button, then press the PROG button 3 |
stop auto playback. Press the PROG |
| again. Repeat this step to program |
button 3; the PROG indicator will |
| additional tracks up to a maximum of |
appear in the CD display. |
| 24 tracks. |
|
|
|
3 | 1 |
| 2 |
| 3 |
Press the PLAY/PAUSE (®p) /POWER ON button 1 to begin Programmed playback and adjust the VOLUME control 2 and DBBS switch 3 as desired.
4 | 2 |
1 |
To skip forward or backward through the programs, press the Skip/Search o 1 or n ❷ button. When the disc is through playing, it will stop.
NOTES:
•Press the STOP (■)/POWER OFF button to stop the disc before it is finished.
•As each program is played, the track number is shown in the display.
•To clear the memorized program: press the STOP (■)/POWER OFF button again while in the stop mode, wait approximately 60 seconds and the unit will turn off or open the CD compartment.
•Programming is the ability to preselect the order in which a series of tracks will be played.
•Each track may be stored in the program memory as many times as desired (up to 24 tracks).
14