Memorex MD6882 manual Radio Operation To Listen to the Radio

	RADIO OPERATION
TO LISTEN TO THE RADIO
1	2	2	2	3
	1			1

Set the VOLUME control 1 to minimum and plug the headphones into the PHONES jack. Press the PLAY/PAUSE (®p)/POWER ON button 2 to turn the unit on.

Slide the FUNCTION switch 1 to the RADIO position. Press the ESP/BAND button 2 to select a band (AM or FM).

If listening to FM, press the MODE button

❸to turn FM Stereo ON or OFF.

3	2
1

4	3
	1
	2

Press and release the Skip/Search/ Tuning o 1 or n 2 button to tune a station. Press and hold the Skip/Search/ Tuning o 1 or n 2 button for Auto Scan (see below).

Adjust the VOLUME control 1 and DBBS switch 2 as desired. If FM STEREO reception is weak/noisy, press the MODE button 3 to turn off Stereo, in this case the reception will be monaural.

5

To turn the radio off, press the STOP (■)/POWER OFF button.

ANTENNAS

AM – This unit has a built-in ferrite bar antenna, which provides adequate reception in most areas. If reception is weak, turn the unit to improve reception.

FM – The headphones act as an antenna for FM. Extend the headphone wire for best FM reception.

AUTO SCAN

Press and hold the Skip/Search/Tuning o or n button for approximately one second and the unit will automatically search for the next available station.

7