MC1003.QXD 3/3/03 9:56 AM Page 7
INSTALLATION
SPLASH RESISTANT: DO NOT use this unit under direct water flow. This unit is splash resistant, meaning it can withstand small splashes of water.
MOUNTING THE UNIT ON THE BASE
To use this unit with the supplied base, simply slide the hole on the rear of the unit into the hook on the base and gently push it backwards so it snaps in place as shown in figure 1.
Hole Hook
Figure 1
REMOVING THE UNIT
FROM THE BASE
To remove unit from base, simply press in on the tab located at the bottom of the base and lift up the unit as shown in figure 2.
USING THE HANGING |
|
CORD (No Figure): |
|
Use the Hanging Cord to |
|
hang the unit on an already |
|
installed hook, nail, etc. |
|
When using the Hanging |
|
cord, also use the Wall | Figure 2 |
Adapter for extra support. |
7