MPD8610 O/M.QXD 8/12/02 11:27 AM Page 5
INSTALLATION
This CD player can be powered by either 2 “AA” batteries or the provided AC adapter.
AC Operation
To operate the unit using AC power, connect an AC adapter (not included) to the DC4.5V jack on the rear of the CD Player and to a wall outlet having 120V, 60Hz AC only. The batteries are automatically disconnected when the AC adapter is used.
NOTE: There is no AC adapter provided with this unit.
Battery Installation
Batteries need to be replaced when “LOW BATTERY” appears in the display. Fresh Alkaline batteries will last approximately 8 hours with a standard music CD
and 10 hours with an MP3 CD.
1.Open the battery compartment door on the bottom of the unit by sliding it out and then lifting it. To prevent the possibility of losing the cover, it cannot be removed.
2.Insert two (2) “AA” batteries (not included) according to the polarity diagram. Alkaline batteries are recommended for longer playing time.
–
+
+
–
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1.Do not mix different types of batteries together (e.g. Alkaline and
2.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
3.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)
5