INSTALL MULCHER PLATE
(If previously removed)
1.Raise and hold deflector shield in upright position.
2.Place front of mulcher plate over front of mower deck opening and slide into place, as shown.
3.Hook front latch into hole on front of mower deck.
4.Hook rear latch into hole on back of mower deck.
|
| Mulcher |
Deflector | \f/ | Plate |
Shield |
|
|
|
| Latch |
/%
_kCAUTION: Do not remove deflector shield frOm mower. Raise and hold shield
when attaching mulcher plate and allow it to rest on plate while in operation.
TO CONVERTTO BAGGING OR DISCHARGING
Simply remove mulcher plate and store in a safe place. Your mower is now ready for discharging or installation of optional grass catcher accessory.
NOTE: It is not necessary to change blades. The mulcher blades are de-
signed for discharging and bagging also.
CHECKTIRE PRESSURE
The tires on your tractor were overinflated at the factory for shipping purposes.
Correct tire pressure is important for best cutting performance.
•Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section of this manual.
CHECK DECK LEVELNESS
For best cutting results, mower housing should be properly leveled. See "TO
LEVEL MOWER HOUSING" in the
Service and Adjustments section of this manual.
CHECK FOR PROPER POSITION OF
ALL BELTS
See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.
CHECK BRAKE SYSTEM
After you learn how to operate your tractor, check to see that the brake Is property adjusted. See "TO ADJUST
BRAKE" in the Service and Adjustments section of this manual.
I/CHECKLIST
Before you operate and enjoy your new tractor, we wish to assure that you receive the best performance and satisfaction from this quality product.
Please review the following checklist: ,/ All assembly instructions have been
completed.
,/NO remaining loose parts in carton. v" Battery is properly prepared and
charged. (Minimum t hour at 6 amps). ,/'Seat is adjusted comfortably and
tightened securely.
,/All tires are propedy inflated. (For shipping purposes, the tires were overinflated at the factory).
,/ Be sure mower deck is properly leveled
for leveling).
,/Check mower and drive belts. Be sure
they are routed properly around pulleys and inside all belt keepers.
,/" Check widng. See that all connections are still secure and wires are preperly clamped.
,I Before driving tractor, be sure free- wheel control is in drive position.
While teaming how to use your tractor, pay extra attention to the following important items:
/" Engine oil is at proper level.
,( Fuel tank is filled with fresh, clean,
regular unleaded gasoline.
,/" Become familiar with all controls - their location and function. Operate them before you start the engine.
,/Be sure brake system is in safe operat- ing condition.
•/ It is important to purge the transmission before operating your tractor for the first time. Follow proper starting and
transmission purging instructions (See "TO START ENGINE" and "PURGE
TRANSMISSION" in the Operation section of this manual).
10
