3 Set the time and intensity for the neck, shoulder, back, and lower back,
respectively (
).
• The level shifts sequentially whenever the button is pressed.
Display | How to shift the level |
|
• Press the | button to shift the levels for “NECK,” “SHOULDER,” “MIDDLE,” and “LOWER” by one up/down at the same |
time. |
|
•3 bars represents more time than one bar.
•If all areas are 3 bars, then both time will be equally long and the massage will be strong in all areas.
•If all areas are just one bar, then massage length will be the same, and intensity will be lighter.
4 Press the 
button to start the program.
The massage will start after the body scanning.
To change the time and intensity in the middle of a massage
Set the condition again with Steps 3 and 4 .
•Press the 
button within approximately 30 seconds after resetting in Step 3 , otherwise the reset will be cancelled automatically.
Setting the Time and Intensity
•In the
Massage Sequence
•The massage starts in the area with the highest numbers of bars selected, and moves successively from highest to lowest.
•If the levels of fatigue are the same, the massage will follow the sequence of “NECK,” “SHOULDER,” “MIDDLE,” and then “LOWER.”
Massage actions for the respective level of fatigue
Stronger massage mainly Shiatsu
Massage at an intermediate level, mainly
Kneading
Softer massage mainly Swedish
No massage for this part
During a massage
•To change off/on for “LEG/FOOT,” “SEAT,” “HAND/ARM,” or “SHOULDER” and adjust its intensity, see page 30.
•If you want to turn the stretch massage off/on, see page 34.
•If you want to adjust the legrest, see page 35 and 36.
•If you want to adjust the intensity and position of the massage on the upper body using the massage heads, see page 27 and 28.
•If you want to adjust the reclining angle, see page 35.
•If you want to use the “ULTRA KNEAD” function or “REPEAT” function, or change the massage style, see page 27.
•If you want to finish a massage, see page 42 and 43.
23