Panasonic EP30007 Problem Cause and Remedy Unit will not operate at all, Unit has been damaged

Page 51

Problem

 

Cause and Remedy

 

The unit will not operate at all.

 

• The power cord has been disconnected. (See page 16)

• Upper body (neck to lower back) massage

 

• The power switch on the unit has not been turned on.

• Lower body (calves to seat) massage

 

• A Pre-Program button or Manual Operation button hasn’t

• Arm massage

 

 

been pressed after pressing

.

 

 

 

 

 

 

 

Sometimes the power won’t turn on when

is pressed

Approximately 5 seconds are required for program termination

after a massage finishes. Wait at least 5 seconds once all

again when a massage has finished.

 

 

 

movement has stopped before pressing

.

 

 

 

 

 

The unit has been damaged.

 

Stop using the unit immediately.

 

 

The power cord or power plug is abnormally hot.

Stop using the unit immediately.

 

 

Warning

Do not attempt to repair, disassemble or modify the unit.

Failure to observe this precaution may result in fire or injury due to malfunctioning.

Caution

Unplug the power plug immediately and contact a customer service center to arrange for repairs if the unit ceases to function or is otherwise not working properly.

Failure to observe this precaution may result in electric shock or fire.

SPECIFICATIONS

Power supply

Power consumption

 

Massage area (Up-Down)

Upper

Massage area (Left-Right)

Massage area (Forward-back)

body

Massage speed

massage

Lateral/Vertical Travel

 

 

Massage width

Air massage

Air Pressure (Calf)

 

Reclining angle

Automatic Shut-off

Dimensions

When not reclined

(H × W × D)

 

(H × W × D)

 

When reclined

Weight of Unit

Dimension of box (H × W × D)

Weight in box

Maximum user weight

Minimum distance from wall

AC 120 V 60 Hz

195 W

Approx. 30 in. (76 cm) (The massage heads move a total of approx. 26 in. (65 cm))

Distance between massage heads during operation (massage width adjustable) Neck, Shoulder, Back, Lower back: Approx. 3 – 8 in. (7 – 21 cm)

Projected amount of massage head (Intensity adjustable)

Approx. 4 in. (10 cm)

Tap: Approx. 250 – 450 cycles/minute (single side)

Full roll: Approx. 26 – 92 seconds (both ways)

Other than the above: approx. 6 – 50 cycles/minute

Lateral travel: Approx. 1.5 in. (3.8 cm) left-right auto return

Vertical travel (Long): Approx. 30 in. (76 cm) up-down auto return

Vertical travel (Short): Approx. 4 in. (10 cm) up-down auto return

Full roll, Vertical Movement: Approx. 3 – 7 in. (7 – 18 cm)

Other than the above: Same as massage area (left-right)

5:Approx. 32 kPa

4:Approx. 30 kPa

3:Approx. 25 kPa

2:Approx. 19 kPa

1:Approx. 8 kPa

* It may vary with the area slightly.

Backrest: Approx 120˚ – 170˚

Legrest: Approx 0˚ – 85˚

Automatically turns off after approx. 15 minutes (approx. 5 minutes for the quick massage)

Approx. 47.2 × 33.1 × 50 in. (120 × 84 × 127 cm)

Approx. 28.3 × 33.1 × 76.8 in. (72 × 84 × 195 cm)

Approx. 181 lbs. (82 kg)

Approx. 28.3 × 30.7 × 65.4 in. (72 × 78 × 166 cm)

Approx. 216 lbs. (98 kg)

Approx. 264 lbs (120 kg)

15.7 in. (40 cm)

48

Image 51
Contents Operating Instructions Instrucciones de Uso Page Index Important Safety Instructions Safety Precautions Operating Precautions Grounding Instructions Main unit Part names and functionsBack Control Panel Ultra Knead/Repeat Display Voice Guidance Volume DisplaySelf-Program Setting Display Time Remaining Display During massageTo put the unit down on the floor Setting up the massage loungerWhere to use the unit Removing everything from the box and installing the unitWidth Approx 68 cm Height Approx 66 cm Length Approx 160 cm AccessoriesAssembly Connecting the air plugsAttachingarmrests Attaching the control panel stand covers Gap Flat-tip Screwdriver When removing the control panel stand coverConfiguration Raising the backrest to the upright positionPlacing the control panel into the control panel stand Attach the pillow to the velcro fasteners Inserting the shoulder plateAttaching the pillow Shoulder plate PocketCheck the unit Check the power cord and the power plugSwitching on the power supply Before sitting downWhen the massage heads are not in the retracted position Press one of the flashing buttons To select Program Press the button to turn on the powerPre-Program and Quick Massage Characteristics Upper Body Program MassagesBody scanning will commence when the program is selected During a massage When the massage startsOverview of the Pre-Program and Quick Massage Upper Body Self-Program Creating Self-ProgramsOpen the right cover and press the button Self-ProgramMassage Sequence Setting the Time and IntensityPress the button to start the program To change the time and intensity in the middle of a massageManual Selection Massages Manual OperationManual Operation Body scanning for Manual Operation Select the location you want to massageSelect the massage action Press the button to start the actionUltra Knead Shiatsu Swedish For additional operationsChanging the massage style Adjustments During a MassageAdjusting the speed Changing the programAdjusting the position Adjusting the intensityRange that can be massaged on the upper body Width Adjustment LimitsAdjustment of range of intensity Details about the massage styleAdjusting the intensity Open the left coverTo execute the air massage only Adjusting the Legrest length Adjust the legrest so that your feet fit snuglyFor the foot reflexology plate How to use the hand/arm massage Arm MassageInsert the hand all the way inside Center of the armrest Adjustments for the Shoulder Massage Adjustments for the seat/thigh massageOuter Shoulder Massage To execute the stretch massage only Using the stretch massageOperations of the leg stretch Operations of the arm stretchOttoman and Backrest height adjustment Legrest slide lever Adjusting the voice guidance volume Press Button to adjust the volumePress the button to shift the volume level by one up/down Adjusting the control panel stand and pillow Adjusting the control panel standAdjusting the pillow for correct height during a massage Advanced user memory function Saving the user program settingsWhen the selected button starts flashing quickly Press the button used to save your settingsFor Pre-Program, Quick Massage, and Self-Program Settings that can be savedLeg stretch settings Leg stretch settings Air massage settingsErasing saved data Press the button to turn on the power When the massage is complete After completing the massageEmergency Stop Press the button Keep the lock switch key out of reach of children Disconnecting the powerCleaning and Maintenance Areas covered with synthetic leatherWipe these areas with a soft, dry cloth Panel on the seat Moving the UnitLifting the Unit Do not move the unit while someone is seated in itUsing the wheels to move the unit Neck Problem Cause and Remedy Motor NoisesMassage heads stop during operation Massage heads do not come up to the shoulder orPower cord or power plug is abnormally hot Problem Cause and Remedy Unit will not operate at allSometimes the power won’t turn on when Is pressed Again when a massage has finishedPanasonic Consumer Electronics Company

EP30007 specifications

The Panasonic EP30007 is a state-of-the-art massage chair designed to provide unmatched relaxation and comfort in the convenience of your home. This premium chair incorporates advanced features and technologies that cater to a variety of therapeutic needs, making it a perfect addition to any wellness routine.

One of the standout features of the EP30007 is its comprehensive massage capabilities. It employs a 3D massage system that mimics the techniques used by professional massage therapists. The chair is equipped with a sophisticated mechanism that adjusts the intensity and depth of the massage according to individual preferences. This allows users to experience a customized massage that targets specific areas of tension, such as the back, neck, and shoulders.

In addition, the EP30007 utilizes advanced body scanning technology. This feature ensures that the chair can accurately detect the individual contours and dimensions of the user's body. By doing so, it optimizes the massage experience, allowing for precise alignment of the rollers and enhancing the overall effectiveness of each session.

The chair also boasts an extensive range of massage techniques, including kneading, tapping, rolling, and stretching. Each technique can be adjusted for strength and duration, allowing users to switch between soothing relaxation and invigorating relief on demand. A unique feature of the EP30007 is its ability to combine different massage techniques for a more holistic experience.

Another impressive characteristic of the Panasonic EP30007 is its zero-gravity reclining feature. This design elevates the feet and positions the user in a way that reduces pressure on the spine, promoting a sense of weightlessness and enhancing blood circulation. This position is particularly beneficial for those seeking to relieve stress and improve overall well-being.

The EP30007 also incorporates heat therapy, which adds another layer to the massage experience. The warmth from the lumbar heat function penetrates deeply into the muscles, providing soothing relief to tense areas and promoting relaxation.

Furthermore, the chair is equipped with a user-friendly control panel, allowing for easy navigation through various settings and programs. With multiple preset programs, users can select options tailored to their needs, whether it’s relaxation, recovery, or rejuvenation.

In summary, the Panasonic EP30007 is a highly advanced massage chair that combines innovative technology with user-oriented design. Its extensive features, including a 3D massage system, body scanning, zero-gravity recline, and heat therapy, make it an exceptional choice for those looking to enhance their home wellness experience. With the EP30007, Panasonic sets a high standard in the world of massage therapy, delivering comfort that can significantly improve quality of life.