I N S T A L L A T I O N S / S E T U P
STARTING UP
Initial Settings and Powering Up
Upon activation, all of the LEDs on the front panel should light up once and then go out. Depending upon whether or not EVOi.net has been powered up before or
has just been shipped from the factory, the following indicators will remain on:
Factory Settings
After shipping from Factory the power up defaults will be as follows…
Settings | Power Up State |
Delay Setup | Off |
AEQ On | Off |
Aux Auto EQ Setup | Off |
Main Auto EQ Setup | Off |
Test | Off |
EQ Select | Neutral |
Live AFC | Off |
Fixed AFC | Off |
Normal Power Up Settings
After first use the power up defaults will be as follows…
Settings | Power Up State |
Delay Setup | Last Known Setting |
AEQ On | Last Known Setting |
Aux Auto EQ Setup | Last Known Setting |
Main Auto EQ Setup | Last Known Setting |
Test | Off |
EQ Select | Last Known Setting |
Live AFC | Last Known Setting |
Fixed AFC | Last Known Setting |
INPUT |
| SPEAKER STATUS |
| ANTI FEEDBACK CONTROL |
evo |
|
| FILTERS FREE 1 |
WARNING | FIXED AFC SET | 2 |
|
|
|
|
|
|
|
| 3 | |
| SIGNAA |
| L |
| FIXED SETUP |
| LIVE AFC ON | ||
|
|
|
|
| OKAY |
|
| ||
|
|
|
|
|
|
|
|
|
|
A B |
| 1 2 |
| 3 4 |
HOLD TO CLEAR FIXED HOLD TO CLEAR LIVE
Pushing the Buttons
The soft buttons on EVOi.net have been designed such that it is very difficult to accidentally activate or switch something off. To avoid frustration please refer to the following guideline for button operation:
Press, or
least 2 seconds.
Understanding Speaker Status
On the front panel, two sets of LED indicators (see Features on page 4) provide visual status of amplified signal levels driving EVO loudspeakers. The indicator states are:
OKAY | WARNING | SPEAKER STATUS | |
Off | Off | Not connected | |
On | Off | Connected | |
On | On (flickering) | Connected, Output Clipping | |
|
|
| |
On/Off1 | Off | Test Mode, Pink Noise1 | |
Flashing2 | On (always) | Error2 | |
1. | See “Testing The System” on page 10. | ||
2. | See “Speaker Status Error Codes” on page 26. | ||
For easy recognition during the “On” state, OKAY indicators are green, while WARNING indicators are red.
If upon activation the WARNING indictor/s illu-
minate (SPEAKER STATUS), the green OKAY
LED will flash an error code. This is a Speaker
Status Error Code – see Troubleshooting on page
26 and refer to AC Power Up on page 25.
9