P L I C a T I O N S | JBL EVOi.net guide

A P P L I C A T I O N S

EVOi.net is the “network” center of any EVO Loudspeaker System. It facilitates access to all EVO Loudspeaker functions and monitoring. EVO Loudspeaker Systems have been optimized for small to mid-size venues, where a pair will sufficiently reinforce sound for an audience of up to five hundred people. They have been designed with specific applications in mind: schools and sports facilities; places of worship; and performance venues. Typically the program of events are quite varied and high quality reinforcement is required for speech, live music and recorded music playback. This section refers to typical applications identified in the EVOi.324 Users Guide and describes how to hook up EVOi.net and optimize the placement and position of the dedicated Measurement Microphone. These are very simple instructions and are for ideal situations. As guidelines, they are approximate and it may not be possible to follow strict practice. The beauty of EVO is that all the setup routines only take a few moments and that if one configuration doesn’t work, then re-setting the entire system is only a few moments away!

EVOi.net IN RECTANGULAR ROOMS

Small Rectangular Room:

EVOi.net + 1 Main (Mono) EVOi.324

For the simplest EVO System, EVOi.net is hooked up as illustrated below. The inset diagram indicates the approxi-

mate location of the Measurement Microphone (for accurate placement details see ‘Placing Measurement Microphone for MAIN EVO Loudspeakers’ page11). Remember to engage the MONO SUM switch!

EVOi.net Rear

(NOTE: For clarity, power connections are not shown.)






IMPORTANT: Make sure POWER is off		Mono	Mono
before making connections.		Mono	Mono
before making connections.	In
	In

XLR Signal Cable

Speaker Placement In Room

EVOi.324

Main

1
	Mono
Approximate measurement microphone placement.	Audio Output
	Audio Output

1 = Auto EQ. Main Out Setup 1&2

(from Mixer)

Main Mono

XLR Signal Cable

EVOi.324

Input