Thank YOU for Choosing JBL, Unpacking the System

THANK YOU FOR CHOOSING JBL

For more than 60 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office.

We’re confident that the JBL system you have chosen will provide every note of enjoyment that you expected – and that when you think about purchasing additional audio equipment for your home, car or office, you will once again choose JBL.

Please take a moment to register your product on our Web site at www.jbl.com. It enables us to keep you posted on our latest advance-ments, and helps us to better understand our customers and build products that meet their needs and expectations.

The JBL® On Air Control® 2.4G AW is an advanced wireless loudspeaker system that allows you to enjoy your favorite music in remote locations around your home, or to add surround speakers to your home theater system without running wires to the back of the room. To ensure trouble-free performance, please carefully read these instructions completely before connecting or using the system.

UNPACKING THE SYSTEM

Carefully unpack the system. If you suspect damage from transit, report it immediately to your dealer and/or delivery service. Keep the shipping carton and packing materials for future use. Open the package and verify the following contents:

Included

1 x Transmitter module

1 x Power supply for transmitter

1 x 230V 2-Prong AC power cord for transmitter power supply 1 x Wall-mount bracket for transmitter with 2 x panhead

M3 x 4 machine screws for attaching wall-mount bracket to transmitter

MUTE INPUT

VOL

Remote Control

ID	–	+
ID
CODE
1 2 3 4	TO RIGHT SPEAKER
DC 20V	SUB-OUT	LINE-IN
LEFT-CHANNEL SPEAKER			Left/Active Speaker
LEFT-CHANNEL SPEAKER			(Rear)

4 x Small round self-adhesive feet – to be attached on transmitter’s left side panel if transmitter is to be used vertically

1 x Active speaker/receiver (left-channel speaker)

1 x Power supply for active speaker/receiver

1 x Wall-mount holder for active speaker/receiver universal power supply

1 x Passive speaker (right-channel speaker)

2 x Terminal covers for active and passive speakers

6 x M3 x 8 self-tapping screws to attach terminal covers

2 x Wall-mount rotatable brackets for active and passive speakers (includes bar wrench and backup cords)

1 x Remote control

1 x Interconnect cable (1m/3.3 ft. RCA – RCA)

1 x Interconnect cable (1m/3.3 ft. RCA – 3,5mm (1/8-inch) mini plug) 10m/33 ft. x Speaker wire

1 x Owner’s manual (multilanguage)

–+

TO LEFT SPEAKER

RIGHT-CHANNEL SPEAKER

Wireless Transmitter

Right/Passive Speaker

CODE

1 2 3 4 R INPUT L