Yamaha DVD-S1800 dimensions 13 En, Hdmi video output, Hdmi audio output

CONNECTIONS

■HDMI video output

This unit is compatible with the following video formats:

480p/60 Hz, 576p/50 Hz, 720p/50 Hz, 60 Hz, 1080i/50 Hz, 60 Hz, and 1080p/50 Hz, 60 Hz.

Notes

•You need to select one of the HDMI resolution settings by pressing HDMI on the remote control repeatedly or by using the HDMI Video setup menu (see page 36).

•Depending on the connected DVI component, black and white in the image may not be distinct. In this case, adjust the picture setting of the connected DVI component.

■HDMI audio output

Audio format		Analog output		HDMI Audio
		setting	Auto*1		PCM	Off
	Dolby Digital	Multi-channel	Dolby Digital		PCM multi*2
		Stereo			PCM 2ch
	DTS	Multi-channel	DTS		PCM multi*2
DVD-Video		Stereo			PCM 2ch
	MPEG	Multi-channel	MPEG		PCM multi*2
		Stereo			PCM 2ch
	PCM 2ch*4	Multi-channel/Stereo	PCM 2ch		PCM 2ch
	Multi	Multi-channel	PCM (PPCM) multi*2,3		PCM (PPCM) multi*2,3
DVD-Audio		Stereo	PCM (PPCM) 2ch*3		PCM (PPCM) 2ch*3
	2ch*4	Multi-channel/Stereo	PCM (PPCM) 2ch		PCM (PPCM) 2ch	Off
CD/MP3/	2ch	Multi-channel/Stereo	PCM 2ch		PCM 2ch
WMA/DivX®
	Multi	Multi-channel			PCM multi*2
DTS-CD		Stereo	DTS		PCM 2ch
	2ch	Multi-channel/Stereo			PCM 2ch
VCD	2ch	Multi-channel/Stereo	PCM 2ch		PCM 2ch
	Multi	Multi-channel			PCM multi*2
SVCD		Stereo	MPEG		PCM 2ch
	2ch	Multi-channel/Stereo			PCM 2ch
SA-CD	Multi/2ch	Multi-channel/Stereo	–		–	–

*1: If the connected HDMI component does not support bitstream signals (Dolby Digital, DTS, and MPEG), the audio output is automatically changed from bitstream signals to PCM signals.

*2: If the HDMI component does not support multi-channel audio signals, the audio output is automatically changed from PCM multi-channel signals to PCM stereo signals and 48 kHz/16 bits signals or less.

*3: If the audio source is prohibited from downmixing, the front L/R channel audio and 48 kHz/16-bit signals or less are output instead of downmixed stereo.

*4: If the connected component does not support more than 48 kHz, the audio output is automatically changed to 48 kHz/ 16-bit signals or less.

Notes

•You need to set HDMI Audio (see page 37).

•SA-CD signals cannot be output using HDMI. Make an analog connection to listen to SA-CD (see page 10).

English

13 En