Teac HD-P2 owner manual Specifications

Page 27

Specifications

Recording Media: Compact Flash, Microdrive

File Format: BWF Broadcast Wave File (FAT16/FAT32)

Recording time: 24 minutes (256 MB Compact Flash, Fs=44.1 kHz 16 bit stereo)

Operating time: 5 Hours

Sample Rates: 44.1/48/88.2/96/176.4/192 kHz

Sample Clock refs: S/PDIF, Video (NTSC or PAL), LTC, WORD

Quantization: 16/24 bit

Pre-record buffer: Up to 10 seconds

Time code types: 23.976,24,24.975,25,29,29.97 DF/NDF, 30 DF/NDF

Frequency response

Nominal level: 20 Hz to 20 kHz

±1.0 dB (44.1 kHz/48 kHz)

MIC to LINE OUT: 20 to 40 kHz

0.5 dB/–4.0 dB (88.2 kHz/96 kHz)

20 to 80 kHz 0.5 dB/–20 dB (176.4 kHz/192 kHz) Noise level Trim Max (22 Hz to 22 kHz): Up to –55 dBu

MIC to LINE OUT THD+N

MAX LEVEL at 1 kHz: Up to 0.01% MIC to Line Out

TRIM MIN: Up to 0.01% 22 kLPF

Crosstalk at 1 kHz: Over 80 dB MIC to Line Out

Delay: 44.1 kHz

< 0.6 msec

192 kHz

< 0.1 msec

Limiter: Attach time

Up to 25 usec

Release time

Up to 50 msec

Low Cut: High pass 100 Hz cut off –18 dB/OCT

Phantom Power: +48 Volt, 10 mA

Input/Output Connectors

Analog I/O

MIC Input

Connector: XLR–3–31 type

Input Impedance: 1.3 kØ Balance

Mic Input Level: –60 dBu (Trim Max) to 13.8 dBu (Trim Min)

Internal Mic level: –60 dBu (Trim Max) to 13.8 dBu (Trim Min)

Headroom: 16dB/22 dB (with limiter)

Maximum Gain: 46.2 dB

Pad: 20 dBS

LINE Input

Connector: RCA Pin type Input Impedance:10 kØ

Input Level: –46.2 dBV (Trim Max) to 0 dBu (Trim Min)

Headroom: 10 dB

Maximum Gain: 46.2 dB

LINE Output

Connector: RCA Pin type

Input Impedance: 100  Ø

Input Level: –10 dBV

Head Room: +6 dBV

Headphone Output

Connector: 6 TRS PHONE jack (Tip: L, Ring: R, Sleeve: GND)

Output Power: 55 mW+55 mW (32 Ø)

Speaker Output:

500 mW (16 Ø)

Specifications

Digital I/O

COAXIAL INPUT/OUTPUT

Connector: RCA Pin type

Input Impedance: 75 Ø

Format: IEC60958 (S/PDIF)

Quantization: 24 bit

Other Inputs

LTC INPUT

Connector: XLR–3–31

Input Impedance: 75 Ø

VIDEO INPUT

Connector: BNC

Input Impedance: 75 Ø

KEYBOARD

Connector: PS/2

FIREWIRE

Connector: IEEE.1394 (6 Pin)

Format: IEEE.1394 (Asynchoronous)

Baud Rate: 400 Mbps

Display

LCD: 240x160 dots with backlight

Power

AC ADAPTOR

Input: USA/Canada 120 V AC, 60 Hz

Europe/U.K. 230 V AC, 50 Hz

Australia 240 V AC, 50 Hz

Output: DC12 V

Rash Current: 600 mA

Power Consumption: 6 W (CompactFlash)

Battery

8 x AA type dry cell (NiMH recommended)

Operating temperature: 0° to 35° C

Dimensions (w x d x h): 260 x 196 x 65

Weight: 1.2 kg (without the batteries)

Compatible Operating Systems:

Windows XP and Macintosh OSX ~10.3

TASCAM HD-P2 Owner's Manual 27

Image 27
Contents HD-P2 Appliance to Rain or Moisture Important Safety PrecautionsTrademarks Important Safety InstructionsTable of Contents About this manual Supplied accessoriesIntroduction Document ConventionsSystem Organization File System Format Menu keys and Shuttle/Data wheel Transport Keys and Hold SwitchHD-P2 Interface KeysRight Side Audio Switches, Inputs & OutputsAudio Switches Left SidePower Setup Operation Playing Audio HD-P2 Playback ConsiderationsMedia Space and Recording Operational Screen HD-P2 Screens and MenusMonitoring Audible AlertsMain Menu Project Settings MenuMenu Navigation Project MenusSample Width 16 or 24 bits Project Trash Manager Project Files MenuSystem Settings System MenusChange/New Project Media Management Power ManagementSet System Time Audio Clock ManagementReformat Media Media CleanupMedia Information Media Speed CheckDisplay Menu Software UpdateDefault Project Settings Project TemplatesClock Source Timecode SettingsTimecode OverviewJam Sync Trigger ModeRate Pull Up/Down FreeWheelShifted Menu Keys Key ShortcutsShortcuts OffsetExternal PS/2 Keyboard Equivalents External PS/2 Keyboard EquivalentsHD-P2 Conform Application FireWire DockDocking and Conforming Compact Flash Card LayoutHD-P2 Conform Application Screens Dimensional DrawingSpecifications SpecificationsHD-P2