Teac DVDPublisher/2 Max Consec.bad, Master Drive, Stop Reject Full, Sticky Media, Mini Disc Mode

Page 19

Max Consec.bad

Default Setting for this should be OFF.

Master Drive

This option allows the user to select which drive (recorder or CD-ROM drive if installed) will be used to read the master. Use the left and right arrow keys to select the desired drive.

Stop Reject Full

This should be sent to YES. The rejected disc count is kept, and once it reaches a trigger level, duplication will halt - waiting user intervention to clear the reject pile. This prevents the fouling of the lower drives by the reject pile, and it is recommended thatthisbealwayssettoYES.Thecountismadeona‘perJob’ basis, and so it is expected that the reject area be cleared before the start of any duplication job.

Sticky Media

If set to yes the loader will be more persistent when picking discs. Picking behaviour will include a shake during an input above the input stack. Certain typesofmediahavebeenfoundto‘stick’together,andalthoughtheloader mechanism has been designed to pick, and physically touch one disc at a time, the attraction between discs can cause two to be picked at once. It is highly recommendedthatyouavoidusinganymediathatexhibit‘sticky’properties. This setting will help when you have to.

Mini Disc Mode

This option will be for future options for Mini Disc printing. Check back with us for availability of this option kit.

Last Char Name

This option determines the behaviour exhibited on entering image names on the duplicator. If this is set to YES the cursor carries forward the previous character entered. This allows for faster entering of names –through fewer button presses. If a space is required, or the next letter you need is closer to the start of the alphabet than the previous character entered, then moving the cursor back one space, and then forward two spaces. The cursor only carries forward the previous character if it was changed, and so by first shuffling backwards, you have a blank. It does take some getting used to –but with use, it does provide an improved way of quickly naming images.

When set to NO the systembehavesinthewaydescribedinthe‘EnteringText’ section further through this manual.

Drive 1 & Drive 2

This option is for enabling or disabling one or both recorders in the system.

15

Page 18 Page 20
Image 19
Page 18 Page 20
Contents CD\DVD Disc Publisher System P y r i g h t Piracy Statement Table of Contents Quick Start Box ContentsMount Plate Other RequiermentsPrinter Setup Power OnOperating Environment Page Quick Start Copying 220 Max. disc capacity Quick Start Comparing Turning On OperationLCD Display KeyboardMenu Structure Show HD Free Space Network ModeUtilities Menu Hard Disk UtilitiesAudio Compilation Firmware UtilitiesLoad System F/W Load Loader F/W System Information Upgrade License Setup Menu Loader UtilitiesPage Async Copying Multi Image HDAsk Quantity Copy Index MarksStop Reject Full Mini Disc ModeMax Consec.bad Master DriveRead DVD Speed SetupRead CD Data Read CD AudioEntering Text Password MenuDisc Image Name Copying DiscsInsert Master Disc Press Enter key Comparing Discs Batch ModeNo Hard Disk Appendix a Error MessagesBad Master Default Setup Appendix B SetupDuplication Options Setup Supported Formats Following is the Disc Publisher menu structure Page Page CDs for Distribution Appendix C -CD Creation hints & tipsTechnical Support To contact the Teac Service Center
Top Page Image Contents