Connecting to Computer
EN Charging the Battery
The player’s battery can only be charged through the USB port of a computer.
1.Slide the USB connector upward as shown below.
2.Insert the USB connector of the player into the USB port on the computer tightly (use an optional USB extension cable if necessary). Once connected, the display shows as below:
USB Connected
Hold
to charge batt.
3.Press and hold 
to enter battery charging mode. The display shows as
below with the battery icon 
animating.
USB Connected
•Charge the unit for at least 2 hours before first use.
•You can still transfer files to the player in the battery charging mode.
•When the battery is full, the display shows “Battery full”.
Transferring Files to the Player
You should refer to the software manual for details in software installation, connecting your player with the computer and transferring files to the
player.
Note
The player will automatically go to battery charging mode if
the battery level is low.
Attention
Do not disconnect the USB connection during music
download. Doing so may corrupt system files or the files being downloaded.
Note
Refer to the software instruction manual for
procedures in installing music management software and transferring files to the player.
5