Quick Start
Playing / Pausing | Listening to Radio | EN |
•Press 
to begin playback.
•Press 
once to pause playback, press again to resume playback.
During playback, file duration, elapsed playback time, file information show on the display.
Skipping Files
•To skip to the next file, press and release 
.
•To go to the previous file, press and release 
within the beginning 4 seconds of the current file. Otherwise, press and release 
twice. (This operation does not apply to audible file. Press 
at any time during
playback to go to the previous file.) Note: for sectioned audible files, press 
and then perform the steps above to go to the previous or next audible section. Press 
repeatedly to select skipping by file or by section.
Scanning Files
•To scan backward, press and hold 
during playback.
•To scan forward, press and hold 
during playback.
1.While the display shows the navigation screen for file selection, press M to access the player’s menu. (If the display shows the playback screen, press M twice to access the player’s menu.)
2.While “Go to” is highlighted in the menu, press 
to enter into the submenu.
Go to | > |
Delete File |
|
3.While “Radio” is highlighted, press to switch on the radio.
Radio
Voice Recording
4.Press 
so that “P01” does not show on the display and you have switched off preset mode. “01” can also be any preset station number.
5.Press 
or 
once to tune down or up frequency. or
Press and hold 
or 
and release the button when you see “Searching...” to start automatic search for the next available station. or
Press and hold 
or 
continuously to tune down or up frequency at a faster rate until you release the button.
8