Toshiba SD-P1900SR owner manual Before calling service personnel, Symptom Cause Correction

Page 71

Before calling service personnel

Check the following guide for the possible cause of a problem before contacting service.

Symptom	Cause	Correction
No power.	• The AC adapter or power plug is	• Connect the AC adapter or power plug securely.
	disconnected.

	• The battery pack has been removed.	• Install the battery pack.
	• Battery empty.	• Re-charge the battery.

The LCD turned off by	• The automatic LCD off function turned	• Turn on the player again.
itself.	the LCD off.
No picture on the LCD	• The AV OUT jack is connected.	• When you use the LCD of the player, unplug the AV OUT jack.
monitor.
No picture. (Other than	• The connected TV is not set to receive	• Select the appropriate video input mode on the TV so the picture from
built-in LCD monitor)	DVD signal output.	the player appears on the TV screen.
No sound.	• The equipment connected via the	• Select the correct input mode of the audio receiver so you can listen
	audio/video cable is not set to receive	to the sound from the player.
	DVD signal output.
	• The volume is too low.	• Adjust the volume by turning the volume control.
	• The audio receiver or TV is turned off.	• Turn on the equipment connected with the audio/video cable.
	• The setting of output sound format is	• Select the proper audio setting.
	incorrect.

The playback picture has	• The disc is dirty.	• Eject the disc and clean it.
occasional distortion.	• Player is in fast forward or fast reverse	• Sometimes a small amount of picture distortion may appear. This is
	mode.	not a malfunction.

	• The player was moved or given a	• Vibrating or shaking the player during playback may produce
	shock.	distortion. This is not a malfunction. If not restored to usual status,
		stop playback and start again.
	• The disc is not set ﬁrmly.	• Remove the disc and set it again.		Others

Brightness is unstable or	• The effect of copy protection. If you	• Connect the player directly to the TV. Avoid connecting the player to a
noises are present in the	connect the player to a VTR, TV/VTR	VTR or TV/VTR combination.
playback pictures. (Other	combination or video selector, the
than built-in LCD monitor)	playback picture may be distorted as
	DVD video discs are copy protected.

71

Image 71

Contents SD-P1900SR Safety Precautions About disposal Serial NoRetain this information for future reference Following information is only for EU-member states Location of the required labelImportant Safety Instructions Additional Safety Instructions Introduction Important Safety Instructions Introduction Important Safety Instructions Precautions Moisture condensation occurs during the following cases Do not use the player when moisture condensation may occurExemptions Table of contents Connections Function SettingsUsing the automobile/vehicle adapter or OthersMain Unit Identiﬁcation of ControlsFront Right sideLeft side 2EMOTE Control 3EEEPAGE INA for DETAILS Identiﬁcation of ControlsCheck that the following accessories are supplied AccessoriesPlayable discs Disc Disc Mark Disc Size ContentsOn Video CDs On storing discs On cleaning discsOn handling discs Preparations Preparations before usingGently insert a ﬁngernail in groove q Preparation of the remote controlInsert the holder into the remote control Operating with the remote controlConnect the supplied AC adapter to wall outlet as below Power connectionAttaching the battery pack Using the battery packDetach the battery pack from the player after being used Charging the battery packAbout battery pack life Detaching the battery packGreen Powering on/offCondition Power Switch Press Mode repeatedly to select the AV mode Changing the AV modePlay your favorite disc PlaybackClose the disc cover Loading a discOpen the LCD monitor Set a discConnecting to headphones Preparations Press Mode repeatedly to select Normal Press PlayPlaying a disc Press Stop to stop playbackPress Select the title you want Pausing playback Still modeUsing the top menu Press TOP MenuPlaying a disc Automatic power off functionAbout the screen saver About the LCDPlaying frame by frame Press REV or FWD on the remote control during playbackChanging a playback speed Playing in fast reverse or fast forwardPress Play or Enter Playing a desired sceneSkipping chapters or tracks Locating by entering numbersTo register a bookmark Marking the desired position to locate Bookmark functionDuring playback, press T repeatedly to display Bookmark Bookmark, then press EnterRepeatedly Playing in random orderPlaying repeatedly Repeating a speciﬁc segmentRepeating a title, chapter or track Press to select Play Program then press Enter To cancel the programmed selectionsPlaying in a favorite order During stop, press MemoryPress Zoom repeatedly until OFF appears Zooming a picturePress Zoom during playback Zoom point Press / / / repeatedlyTo turn subtitles on or off Changing the camera angleSelecting subtitles Press Subtitle during playbackSelecting sound channels of Video CDs Selecting a playback soundPress Audio during playback Jpeg disc compatibility with this player Playing audio/video/picture ﬁlesTo select the category of ﬁle Select Filter using / / / then pressSelect the category using / / / then press Enter Insert a disc you want to playChanges Playing in Random/Intro orderTo display recorded track/ﬁle Press Picture Adjusting the picturePress E.A.M Press E.A.M. repeatedlyPress Display while pressing Shift during playback On-screen Display modePress / to adjust the value Page Function Settings Press Setup Customizing the function settingsPress Setup during stop Easier to hear even if you lower the volume during View ModeYou can easily switch to a preferred audio Enhancement. E.A.M. = Enhanced Audio ModeOff LanguageEnglish FrenchOriginal VideoFill Analog 2ch AudioNormal BitstreamTo change the parental lock level RatingTo set the parental level To change your 5-digit security code DefaultWhen playing a Video CD without using the menu To restore the function settings to their default settingsYou can connect the player to a TV or audio system ConnectionsMake Following settingViewing on a connected TV Connect a TV to the AV OUT jack of this playerViewing pictures from connected video equipment Select the method according to the type of your equipment Connecting to audio equipmentConnecting to an AV ampliﬁer via Digital audio input SettingWith analog audio inputs Connecting to an audio system equippedMake Following setting Using the automobile/vehicle adapter or power port Connections Page Useful informations OthersPCM Output sound conversion tableSymptom Cause Correction Before calling service personnelOthers Player ConnectorsSpeciﬁcations Speciﬁcations Supplied accessoriesLiquid crystal display Page Toshiba Corporation