Earthquake Sound IQ-52B, IQ-52W owner manual Aux AC Outlet connecting to AirPort Express and iTunes

Installation

Aux AC Outlet connecting to AirPort Express® and iTunes®

-Plug one end of the short 1/8” audio cable into your AirPort Express® audio output.

-Plug AirPort Express® into the Aux AC Outlet on the left speaker rear panel.

-Plug the other end of the 1/8” audio cable into the Aux in jack in rear of left speaks.

-To ensure optimum sound quality, simply connect it to an AirPort Express® with a digital optical audio cable. The music is then sent from iTunes® on your computer over the network to the iPod® Hi-Fi using only digital signals. Control your music from the computer in your den, but enjoy the sounds anywhere else in the house.

NOTE:

ŸAirPort Express® Assistant is not compatible with Windows 2000. To setup AirPort Express® from a Windows 2000 computer, you must use AirPort® Admin Utility for Windows version 4.0 or later.

ŸAirPort Express® uses the 802.11g wireless standard. Accessing the wireless network requires an AirPort® or AirPort Extreme® enabled computer or Wi-Fi- certified 802.11b or 802.11g computer. Achieving data rates of 54 Mbps requires that all users have an AirPort Extreme® or Wi-Fi-certified 802.11g enabled computer and connect to an AirPort Express® Base Station. If a user of a Wi-Fi-certified 802.11b product joins the network, that user will get up to 11 Mbps and AirPort Extreme and Wi- Fi-certified 802.11g users will get less than 54 Mbps. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors.

Specifications are Subject To Change Without Notice 11