Earthquake Sound IQ-52B, IQ-52W owner manual IQ-52 Amplifier Features, Rear Panel Features

IQ-52 Amplifier Features

Rear Panel Features

ŸInput Mode: iPod®, RCA, AUX mode select button.

ŸUSB: To sync your iPod® with your computer.

ŸS-Video:A standard 4-pin S-Video cable connector.

ŸRCA Input: Used to connect signals from unbalance, -10dBv devices. The white connector is for the Left input and the red connector is for the Right input.

ŸAUX Input: For maximum flexibility, we have included a stereo “Aux in” input allowing a secondary audio source (such as your portable music player, computer, etc.).

ŸVolume control: Use the volume control to set the output sound pressure from the IQ- 52 system to proper levels as required.

ŸVent Port: This port extends the reproduction of very low frequencies.

Ÿ1/4” TS Output: Use 3 meter, speaker cable included in the IQ-52 package to connect the left and right speakers via the 1/4” TS jacks on the back of each speaker.

ŸPower Switch: This Switch turns the device on and off, The on position is indicated with the marking “•” (a white dot).

ŸPower Receptacle with Fuse Holder: Accepts a detachable 3-circuit line cord in order to power the device. Holds the external main fuse; 110V = 2A, 220V=1A.

ŸAux AC Output: Power outlet for AirPort Express® or wireless repeater devices.

ŸSUB Out: Supply signal below 80Hz Low Frequency for subwoofer.

Specifications are Subject To Change Without Notice 7