Evolution Technologies EV64AMX AppendixD, Technical Specification, Troubleshooting

Page 21

Back to Index

AppendixD

Technical Specification

PORTABLE MP3 PLAYER

EV64AMX

Size(WxHxD)/Weight

¨57 x 74 x 22 mm / 50g (without battery)

Memory

Internal Memory

¨64 MB

Type of removable memory :

¨1 x Smart Media slot

use 16, 32 and 64MB SMC card

Interface

¨USB ( using standard USB v1.1 cable )

LCD Display

¨1 line x icon & 2 lines x 12 characters LCD

Power

¨1 x AA Alkaline

¨15 hours for MP3/voice playback

Signal to Noise Ratio

¨88 dB

Frequency Response

¨20 Hz ~ 20 KHz

Output

¨20mW (each output)

Harmonic Distortion Output

¨0.05 ~ 0.1%

Equalizer

¨5 presets equalizer

Processor

¨50 MHz DSP

Audio Codec support

¨MPEG Audio Layer 3 (MP3)

Firmware

¨Flash based. User upgradeable.

Voice Recording

¨IMA-ADPCM encoding.

¨About 4 hours recording in 64MB Memory player.

Specifications are subject to change without notice.

Mass and dimensions are approximate.

1

Troubleshooting

The player can not power on.

¨Is Battery polarity (+) / ( -) right?

¨Is Battery capacity enough?

(One 1.5 v AA size Alkaline battery is required.)

¨Take the battery out and reinstall the battery to reset the unit.

LCD displays ’Power on / Locked ‘ and power off.

¨Unlock the [HOLD] button and try again

The button is not working.

¨Is [HOLD] button locked? If it is, Unlock the [ HOLD] button and try again

¨Take the battery out and reinstall the battery to reset the unit.

There is no audio produced.

¨Check the earphone and / or the connection is working normally.

¨Check that MP3 files are NOT stored in folder(s).

¨Take the battery out and reinstall the battery to reset the unit.

Can not download MP3 file(s).

¨Is USB connection steady? Observe if the [USB IDLE] displays on LCD of the unit.

¨Check and / or replace the battery.

¨Is there no free space to download the file?

(Continued on next page)

Reset The Unit

The unit is controlled by microcircuit and software. So, please RESET the unit by taking out and reinstalling the battery when the unit stops responding. And if the unit still cannot work, please REFRESHthe firmware.

Refresh The Firmware

The unit will not work if the built -in software is corrupted. Connect the unit to computer and use [Firmware Upgrade] utility to refresh the

software to normal.

Ref. Appendix C : Software Utility

Image 21
Contents Dear Customer Portable MP3 playerBack to Index Table of Contents Package Box Contents aLocations Controls Stereo earphones BPlug To use the Hold function Hold FunctionFor Windows Install SoftwareMacintosh OS MAC OS Click Start RunInstall musicmatch Windows version Musicmatch Setup screenFor Macintosh Verify Correct Installation of the unit Install and UpdateConnect to PC ConnectionSerious damage to the unit or computer system For Macintosh UsersFor Macintosh OS Download MP3 files to UnitPower on / OFF Using the playerIndicators a Navigating & Accessing Menus BBasic play Power Savings Play settingsRepeat modes a Equalizer BRecord Voice Recording voice aPlayback voice file B To Erase MP3 files Erase Music & Voice FilesTo Erase Voice files If it is not the file you want to eraseInformation Submenu Information SubmenuWhat is MP3? AppendixMP3 Websites Precautions for Listening with the Earphones Selection and care of batteryAppendix B Handling the UnitAppendix Software Utility Firmware Upgrade UtilityStorage Device Format Utility Quick download check boxTechnical Specification TroubleshootingAppendixD Music skips sometime Back to Index Evolution Technologies, Inc