Back to Index
Connect to PC
You need not switch off your computer when you connect the unit to the PC since USB is Plug
Connection
(1)The battery must be in the player.
(2)Position the PC so that its USB ports can be easily accessed.
(Note : The USB port(s) may be found on the front panel or elsewhere instead of the back panel. Refer to your PC dealer for support if necessary. )
(3)Plug the flat USB connector of the bundled USB cable to the PC.
(4)Plug the square connector of the USB cable to the unit.
(5)Press Playbutton to turn the unit on.
(6)USB IDLE will appear on LCD of the unit.
For Windows Users
Install and Update
(7)System will detect the new hardware exists in your system and install each of them automatically.
(8)Upon the driver installation is completed, run the Play Update utility that is now available in the start menu of your Windows system.
Verify Correct Installation of the unit
(9)When the Player Update is completed, the player is ready to use. If you wish to check that whether MP3 Flash Player has properly installed on your system, double
(10)You will observe your MP3 Flash Player shows up as Removable Disk (F:) and (G:) drives in Windows.
(11)Removable Disk (F:) implies the
Removable Disk (G:) drive implies the Smart Media Card (if any) inserted into the MP3 Flash Player. In case if Smart Media Card is not present in the player, Removable Disk (G:) will not be accessible.