Back to Index
Appendix
C
Software Utility
Upon the driver installation is completed, two software utilities will be installed in PC.
Customer can use the utilities to format or upgrade the unit. Connect to PC and open Start >Program> Mp3 Player menu (Windows OS).
Notice
It is forbidden to unplug the USB cable while the unit is accessing with computer (while the LCD displays [USB READING] or [USB WRITING] ), because it may cause
serious damage to the unit or computer system.
It is strongly recommended to unplug the cable ONLY while the LCD displays [USB IDLE].
Storage Device Format Utility
User will be able to format the flash memory of the unit through the MP3 Player Format utility shown below. The utility can either be initialized through the Start Menu or by right clicking on the removable storage device drives in Windows Explorer .
Quick format checkbox:
Empty (default): Completely format
Checked : Quick format, not scan for bad sectors.
*Please avoid to use other format utility to format the unit or the Smart Media card.
Firmware Upgrade Utility
The firmware in the player will be able to upgrade through a utility running on your PC. To update the firmware, user needs to run the MP3 Player Update utility shown below. This utility can be initialized through the Start Menu of Windows.
The [Quick download] check box :
Checked (default) : update the firmware and no format the memory
Not checked (Empty) : update the firmware and format the memory. All contents in the flash memory will be lost.
*If it is to refresh the firmware, please let the check box empty, and upgrade the firmware by same version firmware as current.
0