Craig CMP622E manual Basic Operation, Battery Indicator

Page 15

Battery Indicator

= Battery full power.

= Battery empty, connect the unit to the computer for recharging. It would take about 4 hours to fully recharge the battery. During charging, you can playback the music, videos or photos at the same time.

Basic Operation

1.Power On/Off:

1.1Power On:

Slide the Power ON/OFF Switch to ON position to power on the player.

1.2 Power OFF/Standby:

In power on or playback modes, press and hold the >II Button to power off (Standby mode) the player. To power on the player again from the standby mode, press and hold the >II Button again, or

Slide the Power ON/OFF Switch to OFF position to power off the player.

(NOTE: If long period of time will not use the player, recommended to power off the player by the Power ON/OFF switch.)

1.3Volume Control:

In the playback mode, press the VOL button then press the >>I or I<< button to adjust the volume as desire.

1.4Phones Jack:

Insert the included Earphone to the Phones Jack on the bottom of the player.

14

Image 15
Contents Page Page Page Page Page Page Page Transferring Files Battery RechargeFIG.2 Important Note Operation system of the computer Install drive-program at the system of WINAMV Converter Locating the Controls Display Overview Basic Operation Battery IndicatorMain Menu Page Listening Music Page Lyric Display Watching Movies Watching Photos Page Voice Recording Voice Recording Playback Troubleshooting Guide Specification