Craig CMP622E manual

Page 9

files transferring, set the player in USB DISK mode as:

1.Power on the player by slide the POWER Switch to ON position, the setting manual (FIG. 1) will appear on the display automatically.

FIG.1FIG.2

2.Press the >>I or I<< button to select SETUP then press MENU button to enter.

3.Press >>I or I<< button to select Online Device (FIG. 2) then press MENU Button to enter.

4.Press >>I or I<< button to select USB Disk, press MENU Button to confirmed the selection then press and hold the MENU button to save the setting and exit.

5.After above setting, connect the player to the computer by the supplied USB connection cable.

6.Download the specific files into the player as download the files to others portable device.

7.After downloaded, disconnect the unit from computer.

NOTES:

~All the downloaded files in this setting will stored in the Root Directory in the player.

~For video files, only AMV video files (with .amv extension) can be playback by the player. For details, please refer to the AMV converter section.

Download the DRM-WMADigital Rights Management-WMA, songs with copy right protective in WMA formatfiles into the player:

1.Set the Online Device modes to MEDIA DEVICE as above procedures.

2.Connect the player to the computer with the supplied USB connection cable. The

8

Image 9
Contents Page Page Page Page Page Page Page Transferring Files Battery RechargeFIG.2 Important Note Operation system of the computer Install drive-program at the system of WINAMV Converter Locating the Controls Display Overview Basic Operation Battery IndicatorMain Menu Page Listening Music Page Lyric Display Watching Movies Watching Photos Page Voice Recording Voice Recording Playback Troubleshooting Guide Specification