FM Radio Receiving Function

※Reference : Works only on FM radio applied model.

※It's convenient to listen to broadcast with auto seek function.

If FF key or REW key is pressed over 0.5sec after setting to radio, it stops at a receiving frequency. Auto seek function will not give you precise broadcast frequency. At this situation, use REW or FF key for precise control.

●Configuring radio channel

①Select radio mode by pressing radio button.

②Frequency will appear on LCD. Select desired frequency using FF/REW KEY.

●Storing Channel

Select radio mode by pressing radio button.

①Frequency will appear on LCD. Select desired frequency using FF/REW KEY.

②When you press PLAY/STOP button 01 will blink where FM is indicated. Now use FF/REW KEY to select channel (01-10) you wish to store and press play button again to store it to selected channel then FM will be indicated again when it get stored. You can store it up to CH10 using same method.

※Confirming stored channel

When menu button is pressed 'Preset Mode' will be displayed then it will show stored channel and frequency.

Now use FF/REW KEY to select stored channel. When menu button is pressed from channel confirming mode, it will go back to FM frequency mode with 'Frequency Mode' displayed.

●Recording radio broadcast

①Select desired recording radio channel through same step from radio channel configuring step1~2.

②Press record button to start recording. Now recorded messages will be stored in index of voice next to last stored message. Message can't be increased during recording procedure. So, you have stop and start recording again.

Checking recording data during record is impossible and it can be checked from voice property after it's stopped.

-25-