Moxa Technologies Moxa EtherDevice Switch Configuring Relay Warning, Event Setup, Email Address

EDS-510A Series User’s Manual			Featured Functions
	change Password	click the Change password check-box, type the Old
		Password, type the New Password, retype the New
		password, and then click Activate; Max. 45 Characters.
	Old Password	Type the current password when changing the password		None
	New Password	Type new password when enabled to change password;		None
		Max. 45 Characters.
	Retype Password	If you type a new password in the Password field, you		None
		will be required to retype the password in the Retype
		new password field before updating the new password.
	Email Address
	Setting	Description		Factory Default
	Max. 30	You can set up to 4 email addresses to receive alarm		None
	characters	emails from the EDS-510A.
	Send Test Email
	After configuring the email settings, you should first click Activate to activate those settings, and
	then click Send Test Email to verify that the settings are correct.
NOTE	Auto warning e-mail messages will be sent through an authentication protected SMTP server that
	supports the CRAM-MD5, LOGIN, and PLAIN methods of SASL (Simple Authentication and
	Security Layer) authentication mechanism.
	We strongly recommend not entering your Account Name and Account Password if auto warning
	e-mail messages can be delivered without using an authentication mechanism.

Configuring Relay Warning

The Auto Relay Warning function uses relay output to alert the user when certain user-configured events take place. There are two basic steps required to set up the Relay Warning function:

1.Configuring Relay Event Types

Select the desired Event types from the Console or Web Browser Event type page (a description of each event type is given later in the Relay Alarm Events setting subsection).

2.Activate your settings

After completing the configuration procedure, you will need to activate your EDS-510A’s Relay Event Types.

Event Setup

3-57