Moxa Technologies Moxa EtherDevice Switch, EDS-510A Using Port Trunking, Restart, Factory Default

EDS-510A Series User’s Manual			Featured Functions
	Auto load system configurations when system boots up
	Setting	Description		Factory Default
	Enable	Enables Auto load system configurations when
		system boots up		Enable
	Disable	Disables Auto load system configurations when
		system boots up

Save the current configurations to ABC

To export the current configuration file of the EDS-510A, click on Save to save it to the ABC.

Load the ABC’s configurations to the Switch

To import the configuration file of the EDS-510A, click on Load to load it to the Switch.

Restart

Click “Activate” to reboot the EDS-510A.

Factory Default

The Factory Default function is included to give users a quick way of restoring EDS-510A’s configuration settings to their factory default values. This function is available in the Console utility (serial or Telnet), and Web Browser interface.

NOTE	After activating the Factory Default function, you will need to use the default network settings to
	re-establish a web-browser or Telnet connection with your EDS-510A.

Using Port Trunking

Link Aggregation allows one or more links to be aggregated together to form a Link Aggregation Group. A MAC client can treat Link Aggregation Groups as if they were a single link.

The EDS-510A’s Port Trunking feature allows devices to communicate by aggregating up to 4 trunk groups, with a maximum of 8 ports for each group (due to the interface limitation, there is a limit of 3 gigabit ports or 7 10/100 Mbps ports for each Trk trunk group). If one of the 8 ports fails,

3-13