EDS-510A Series User’s Manual Featured Functions
3-61
Desired IP Address
Setting Description Factory Default
IP Address Set the desired IP of connected devices. None
Using Diagnosis The EDS-510A provides two important tools for administrators to diagnose network systems.
Mirror Port
The Mirror port function can be used to monitor data being transmitted through a specific port.
This is done by setting up another port (the mirror port) to receive the same data being transmitted
from, or both to and from, the port under observation. This allows the network administrator to
“sniff” the observed port and thus keep tabs on network activity.
Perform the following steps to set up the Mirror Port function:
STEP 1
Configure the EDS-510A’s Mirror Port function from either the Console utility or Web Browser
interface. You will need to configure three settings:
Monitored Port Select the port number of the port whose network activity will be
monitored.
Mirror Port Select the port number of the port that will be used to monitor the
activity of the monitored port.
Watch Direction Select one of the following two watch direction options:
y Output data stream
Select this option to monitor only those data packets being sent out
through the EDS-510A’s port.
y Bi-directional
Select this option to monitor data packets both coming into, and
being sent out through, the EDS-510A’s port.
STEP 2
Be sure to activate your settings before exiting.
• When using the Web Browser interface, activate by clicking Activate.
• When using the Console utility, activate by first highlighting the Activate menu option, and
then press Enter. You should receive the Mirror port settings are now active! (Press any
key to continue) message.