Moxa Technologies EDS-510A, Moxa EtherDevice Switch user manual DIP Switch Hardware Configuration

EDS-510A Series User’s Manual Featured Functions

EDS-510A Series DIP Switches

1

2

3

4

------

MASTER

COUPLER

TURBO

RING

The default setting for each DIP Switch is OFF. The following table explains the effect of setting the DIP Switch to the ON position.

	DIP Switch	Setting			Description
	------		Serves no function (reserved for future use).
			Enables the EDS-510A to be the Ring Master in a Turbo Ring
		ON	topology, and enables the Turbo Ring break warning. If the
			EDS-510A is the Master of this Turbo Ring, and the Turbo Ring
	MASTER
			is broken, the relay will form an open circuit.
		OFF	Disables the EDS-510A from being the Ring Master in a Turbo
			Ring topology, and disables the Turbo Ring break warning.
		ON	Enables the Turbo Ring coupling function. Uses ports 7 and G1
	COUPLER		of the EDS-510A to form the Ring Coupler path.
		OFF	Disables the Turbo Ring coupling function.
		ON	Enables plug-and-play Turbo Ring redundancy. Ports G2 and
	TURBO RING		G3 of the EDS-510A are used to form a Turbo Ring.
		OFF	Disables plug-and-play Turbo Ring redundancy function.
	DIP Switch Hardware Configuration
	DIP Switch	Turbo Ring DIP			Description
		Switch
		ON			y Turbo Ring Ports
					EDS-510A: ports G2 & G3
					y Coupling Ports
					EDS-510A: ports 7 & G1
	Enable				y Automatically adds the Turbo Ring and Ring Coupling
					ports to the VLANs that you already specified using
					the web interface.
		OFF		The DIP Switch for Coupler and Master will not take
					effect; you can also set up the Turbo Ring by software.
	Disable	ON			The DIP Switch for Coupler and Master will not take
		OFF			effect; you can also set up the Turbo Ring by software.
NOTE	To switch on the Master or Coupler functions of the DIP switch, you must enable the Turbo Ring
	DIP Switch first.
NOTE	If you do not enable any of the EDS-510A switches to be the Ring Master, the Turbo Ring
	protocol will automatically choose the EDS-510A with the smallest MAC address range to be the

Ring Master. If you accidentally enable more than one EDS-510A to be the Ring Master, these EDS-510A switches will auto-negotiate to determine which one will be the Ring Master.

3-10