Honeywell HRDPX manual Motion/Event Configuration, Input

Setup

Motion/Event Configuration

Motion / Event Configuration has four sections; Input, Sensor, Action, and Alarm Monitor. When an event comes in (Input) the DVR records the image according to its settings (Camera Configuration) and triggers an alarm (Action).

Input

CH – S Channels 1-8 / T Channels 9-16

MOTION – ON / OFF [Specify whether to use motion input or not.]

SENS (Sensitivity) – Low / Normal / High / Highest

AREA – Define the motion detection area.

SENSOR – Associate a sensor with the camera channel.

V-LOSS (Video Loss) – Select a channel to report video loss on.

______________________________________________________________________________________________

44