Setup
Disk Configuration
Format
Shows installed Hard Disk Drives and the status of other attached storage devices.
To format a Hard Drive use the arrow keys to select the appropriate device and press ENTER. Select OK to confirm formatting and press ENTER.
To format a USB device use the arrow keys to select USB FORMAT and press ENTER. Select the USB target and select FAT32. Press OK to format.
Tip Refer to the list of Approved USB Flash Drives in the Introduction chapter.
To refresh the list of connected USB devices select USB RESET and press
ENTER.
Caution All USB devices must be formatted as FAT32 before using with the
DVR.
Note Upon formatting a drive, all video and other data stored on that drive will be permanently erased and cannot be recovered.
______________________________________________________________________________________________
32