Honeywell HRDPX manual Go To Last, Go To Jump, Daylight Savings Search, After Image Removal

Operation

Go To Last

View the most recent recorded data.

Go To Jump

View video from a 24 hour period.

Note When DVD-RW is selected as the target media, only Express Search, Go To First Recorded Data and Go To Last Recorded Data Search options are available.

Daylight Savings Search

Daylight Savings Search is used to find recorded data after switching the time at the end of Daylight Savings Period. The System will record data with the same time stamp for two hours when they are repeated. If any overlapped time data exists the system will display the times on this page.

After Image Removal

The DVR is capable of recording video using one of three different resolutions. When using the 720 x 480 resolution, two fields are mixed. Because of the timing gap between the two fields, according to the standardized image rules, after image might occur to high speed moving images. The OpenEye DVR allows the user to remove this by selecting After Image.

Panorama Search

Panorama Search will start searching video from the current frame and play four consecutive frames from the same channel.

Select a channel and press PANORAMA on the front panel or the remote control to use Panorama Search. Press Pause to freeze the display at the desired frame.

Smart Search

Smart Search will search video quickly, from the current frame, and play video forward or backward at 60x normal speed (1 minute=1 second).

Select a channel and press SMART on the front panel or the remote control to use Smart Search. Press Pause to freeze the display at the desired frame.

______________________________________________________________________________________________

58