TP-Link AC1200 manual System Routing Table, To add static routing entries

Archer C5 AC1200 Wireless Dual Band Gigabit Router

To add static routing entries:

1.Click Add New… shown in Figure 4-96,you will see the following screen.

Figure 4-97 Add or Modify a Static Route Entry

2.Enter the following data:

Destination Network - The Destination Network is the address of the network or host that you want to assign to a static route.

Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network portion, and which portion is the host portion.

Default Gateway - This is the IP Address of the gateway device that allows for contact between the router and the network or host.

3.Select Enabled or Disabled for this entry on the Status drop-down list.

4.Click the Save button to make the entry take effect.

Other configurations for the entries:

Click the Delete button to delete the entry.

Click the Enable All button to enable all the entries.

Click the Disable All button to disable all the entries.

Click the Delete All button to delete all the entries.

Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen.

4.16.2System Routing Table

Choose menu “Advanced Routing → System Routing Table”, and then you can view the System Routing Table in the next screen (shown in Figure 4-98). System routing table views all of the valid route entries in use. The Destination IP address, Subnet Mask, Gateway, and Interface will be displayed for each entry.

- 101 -