TP-Link AC1200 To setup a virtual server entry,  Modify - To modify or delete an existing entry

Archer C5 AC1200 Wireless Dual Band Gigabit Router

IP Address - The IP address of the PC running the service application.

Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols supported by the router).

Status - The status of this entry, "Enabled" means the virtual server entry is enabled.

Common Service Port - Some common services already exist in the drop-down list.

Modify - To modify or delete an existing entry.

To setup a virtual server entry:

1.Click the Add New... button. (pop-up Figure 4-67)

2.Select the service you want to use from the Common Service Port list. If the Common Service Port menu does not list the service that you want to use, enter the number of the service port or service port range in the Service Port field.

3.Enter the IP address of the computer running the service application in the IP Address field.

4.Select the protocol used for this application in the Protocol drop-down list, either TCP, UDP, or All.

5.Select the Enabled option in the Status drop-down list.

6.Click the Save button.

Figure 4-67 Add or Modify a Virtual Server Entry

Note:

It is possible that you have a computer or server that has more than one type of available service. If so, select another service, and type the same IP address for that computer or server.

To modify or delete an existing entry:

1.Find the desired entry in the table.

2.Click Modify or Delete as desired on the Modify column.

- 76 -