Moxa Technologies Moxa EtherDevice Switch System File Update-By Remote Tftp, Tftp Server IP/Name

EDS-510A Series User’s Manual		Featured Functions
NOTE	The Turbo Ring Ports and Coupling Ports will be added to all VLANs if you enable the “Turbo
	Ring DIP Switch” and set Turbo Ring DIP Switch from OFF to ON.
NOTE	If you enable the Hardware DIP Switch for Turbo Ring and set the Turbo Ring DIP Switch from
	ON to OFF, then the Ring Ports and Coupling Ports which are added to all VLANs are restored
	to their previous software settings. (For details on how to do this, please refer to “Using Virtual
	LAN.”)

System File Update—By Remote TFTP

The EDS-510A supports saving your configuration file to a remote TFTP server or local host to allow other EDS-510A switches to use the same configuration at a later time, or saving the Log file for future reference. Loading pre-saved firmware or a configuration file from the TFTP server or local host is also supported for easy upgrading or configuration of the EDS-510A.

TFTP Server IP/Name

Setting	Description	Factory Default
IP Address of TFTP	The IP or name of the remote TFTP server. Must be	None
Server	set up before downloading or uploading files.
Configuration Files Path and Name
Setting	Description	Factory Default
Max. 40 Characters	The path and file name of the EDS-510A’s	None
	configuration file in the TFTP server.
Firmware Files Path and Name
Setting	Description	Factory Default
Max. 40 Characters	The path and file name of the EDS-510A’s	None
	firmware file.
Log Files Path and Name
Setting	Description	Factory Default
Max. 40 Characters	The path and file name of the EDS-510A’s log file	None

3-11