Eicon Networks DIVA T/A ISDN The following parameters can be configured:, 9After configuring the parameters, press Escape to exit the Phone Line menu.

DIVA T/A ISDN Modem User’s Guide ◆ Page 76

The VT100 Configuration Tool

8Models equipped with analog device ports: From the main menu, select ‘Phone Line’ and press Enter to open the configuration screen.

*-----------------------------------------------------------------------------*

| DIVA T/A ISDN Modem - International Version 2.2 |

+-------------------------------------------------------------+---------------+

| MENU: Phone Line |Choice: |

| |Yes |

| Phone 1 |No |

| Use modem/fax only: No | |

| Enable distinctive ring: No | |

| | |

| Phone 2 | |

| Use modem/fax only: No | |

| Enable distinctive ring: No | |

| | |

| Region: International | |

| | |

|<ESC> Previous menu | |

+-----------------------------------HELP----------------------+---------------+

| Set supplementary services for this Phone port. |

| -ISDN Bearer Capability is set for Speech during voice calls |

| on the Phone ports.

*-----------------------------------------------------------------------------*

The following parameters can be configured:9After configuring the parameters, press Escape to exit the ‘Phone Line’ menu.

Parameter Description

Use

modem/fax

only

Enabling this option causes the following:

•Enables ‘3.1KHz Audio’. This specifies that the ISDN network has to preserve

the quality of the 3.1KHz voice band that is required for data audio signals

such as faxes and modems .

•Disables calling features such as Call Forward and Call Waiting.

•Disables Dial Access.

Enable

distinctive

ring

Specifies that the phone ring will be slightly different from the regular ring. If

your modem, fax , or telephone is experienc ing difficult y detecting incoming

voice calls, try toggling the distinctive ring feature.

Region Specifies the country in which you are situated. This ensures that the DIVAT/A

implements the ring pattern (and other analog device parameters) suited to

your country. If your country is not listed, use the default, International.

If problems persist, advanced users might also want to try and configure this

parameter using the AT commands AT*F and AT!L. See the ‘DIVAT/A

ISDN Modem Refere nce Guide’ for more information.

Note: If you select China as the Region, the Switch Type parameter (on the

ISDN Parameters s creen) will a utomaticall y be set to Ch ina ISDN.