DIVA T/A ISDN Modem User’s Guide ◆ Page 19
Windows 95/98/NT Installation andSetup
Windows NT 3.51Note on RAS
If you are going to use the DIVAT/A with RAS, RAS must already be installed with at least one
modem. Any modem will do; it is only needed to install the DIVAT/A and will later be
removed. If you do not want to use RAS, go to “Installing the DIVA Software” on page 20.
Setup Instructions
1Power on your PC with all cables connected (see page7 for instructions).
2Insert the DIVAT/A CD into your computer's CD drive.
3Open any text editor.
4Using your text editor, open the file MODEM.INF found in the Windows\System32\RAS
directory.
5Open the file WFWNTEI2.INF (found at the root of the DIVAT/A CD).
6Copy the contents of WFWNTE I2.INF and append it to the e nd of the MODEM.INF file;
save the appended MODEM.INF file, and exit your text editor.
7You must now start the RAS setup program. From ‘Control Panel’, double-click the
‘Network’ icon. From the ‘Installed Network Software’ list, select ‘Remote Access Service’
and click ‘Configure’.
8From the RAS setup, remove the unused modem or any other devices that use the same
COM port as the DIVAT/A, add the DIVAT/A, and then exit RAS. Refer to the RAS online
help for removi ng and addin g modems.
9After exiting th e RAS setu p, you are prom pted to reb oot your P C. Click ‘OK’ a nd allow
your PC to reboot and Windows NT to restart. To shut down the RAS server, double-click
the ‘Remote Access Admin’ icon in the ‘Remote Access Service’ program group. From the
‘Remote Access Admin Server’ menu select ‘Stop Remote Access Server’, and then exit
the Remote Access Admin program.
10 Go to “Installing the DIVA Software” on page 20.