Eicon Networks DIVA T/A ISDN manual Windows 95/98/NT Installation and Setup

Windows 95/98/NT Installation and Setup

6Select ‘Eicon DIVA T-A ISDN Modem’, then click ‘Next’.

7Select the appropriate COM Port the DI VAT/A is connected to. Click ‘Next’, then click ‘Finish’.

8Close the ‘Modem Properties’ window.

9After closing the ‘Modem Properties’ window, you are prompted to configure Dial-Up Networking, as the install modem list has changed. Click ‘Yes’ to configure Dial-Up Networking.

10From the ‘Remote Access Setup’ window, remove any unused devices that use the same COM port as the DIVA T/A, and then click ‘Add’.

11In the ‘Add RAS Device’ window, select the Eicon DIVA T/A ISDN Modem from the drop-down list and click ‘OK’.

12From the ‘Remote Access Setup’ window, click ‘Continue’. You will be prompted to shut down and restart your computer. Click ‘No’. Do not restart your system.

13Go to “Installing the DIVA Software” on page 20.

DIVA T/A ISDN Modem User’s Guide ◆ Page 18