Eicon Networks DIVA T/A ISDN manual Macintosh System 7 or Later Installation and Setup

Macintosh (System 7 or Later) Installation and Setup

To properly set up the DIVA T/A with a Macintosh system (System 7 or later), you must connect the cables, then install the DIVA Terminal Adapters software. You can then use the Configuration Assistant to set your ISDN parameters.

Step 1: Connect the Cables to your DIVAT/A

Following the steps outlined on page 7.

Step 2: Install the DIVA Terminal Adapters Software

The installation program copies all necessary files on your system. These include the DIVA T/A on-line documentation and the DIVA Terminal Adapters Program.

Follow the steps outlined on page 26.

Step 3: Specify your ISDN Settings via the Configuration Assistant

The Configuration Assistant helps you configure your DIVA T/A ISDN Modem to work with your ISDN network connection. Later you may re-run the Assistant or make changes manually using the Configuration Tool.

Follow the steps outlined on page 28.

DIVA T/A ISDN Modem User’s Guide ◆ Page 25